Site work for a transportation facility in Kamloops, British Columbia. Completed plans call for site work for a runway / taxiway.

The Kamloops Airport Authority Society ("KAAS" or the "Airport") is planning a replacement of the existing Field Electrical Centre (FEC) with a new standalone FEC building, replacement of the Airfield Lighting Control System (ALCS), and associated work at the Kamloops Airport. New Field Electrical Centre Supply, deliver and install a new pre-fabricated FEC building onto new concrete pad with FEC exterior dimensions approximately 9m x 4m with power distribution and building equipment (including lighting, receptacles, etc.) including new power feed from the existing powerhouse building. New Standby Power Supply and install standby power system including generator set, fuel system, controls, enclosure and ventilation system onto new concrete pad. Reconnect Existing Airfield Lighting Cabling, Relocate Associated Equipment - Relocation and upgrade of airfield lighting power infrastructure, including underground raceways and cabling, salvage/reinstall four (4) existing constant current regulators (CCRs), supply and install two (2) CCRs, and associated installation work within the new FEC. Replacement of Airfield Lighting Control System (ALCS) Installation of a new Airfield Lighting Control System (ALCS) equipment in the new FEC and the NAV CANADA FSS, including, new fibre cable between new FEC and control tower, testing/programming/commissioning. Miscellaneous Work Preparation of base necessary for new FEC building, trenching, conduit, cabling, construction surveying, quality control testing, and other miscellaneous works. The work to be executed under this contract comprises the following contract items (list is indicative of major contract items only and any quantities are approximate): - Trenching for Cables/Conduit/Duct (350 m) - Directional Drilling (110 m) - Supply/Install new FEC and associated power distribution/equipment (1) - Supply/Install new standby power system (1) - Supply/Install or Salvage/Reinstall Constant Current Regulator (CCR) (2 and 4 each) - Supply/Install new ALCS PLC Control Panel, Workstation, I/O Cabinet (1) - Supply/Install new Fibre Cabling (885 m) - Miscellaneous Airfield Electrical Works Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Question Deadline 11/27/2026 at 2:00 PM PT Queries or clarifications requested by bidders must be submitted in writing and received by the email to Diego Amores, P.Eng., Project Engineer, Avia NG Airport Consultants by e-mail: Diego.Amores@aviang.ca and Greg Cuneo, P.Tech. (Eng.), PMP, Director, Avia NG Consultants by e-mail: Greg.Cuneo@aviang.ca.