Site work and renovation of an educational facility in Waterbury, Connecticut. Completed plans call for the renovation of a educational facility.

Furnish and install one complete motorized gymnasium divider curtain system in the gymnasium. The intent is to provide a durable, safe, fully operational divider capable of separating the gymnasium into functional activity areas while maintaining required egress clearances. The successful proposer shall provide a turnkey installation including field verification, engineering and layout as required by the manufacturer, curtain , drive components, electric winch(es), controls, mounting hardware, electrical coordination, delivery, installation, testing, adjustment, training, warranties, and all incidental materials necessary for a complete system. Location- Bucks Hill Elementary School , 330 Bucks Hill Road, Waterbury, Connecticut 06704. All questions and communications about this request for Proposal and submission requirements must be directed to the City of Waterbury ProcureWare website and must be received by 2:00 PM on November 19, 2026. Responses to questions submitted by the above date or identified at any Information Session to be held in regard to this RFP, along with any changes or amendments to this RFP, will be available via the City of Waterbury ProcureWare website by November 24, 2026, 2:00 PM If you have any procedural questions in this regard , please call the Purchasing Director at (203) 574-6748. Perform a pre-installation field survey and verify all dimensions, attachment elevations, structural support locations, obstructions, electrical conditions, clearances, and access requirements before fabrication. Provide shop drawings and manufacturer product data showing curtain dimensions, upper and lower fabric sections, colors, seams, hems, drive system, web belts, support points, winch(es), controls, electrical requirements, stored position, and clearances. Furnish and install one complete motorized divider curtain approximately 40 feet wide by 32 feet high. Final fabrication dimensions shall be based on verified field conditions and approved submittals. Provide all manufacturer-required support brackets, clamps, pipe/battens, drive pipe, bearings, guides, web belts, fasteners, hardware, controls, and accessories for a complete installation. Provide electric winch(es), limit controls, key-operated or manufacturer-standard supervised controls, and all components required for safe raising and lowering of the curtain. o Coordinate final power requirements and connections. Proposal shall clearly state the voltage, phase, amperage, circuit, disconnect, and any electrical work included or excluded. o Protect existing floors, walls, ceilings, equipment, and finishes. Repair damage caused by the contractor at no additional cost to WPS. o Test the completed system through multiple full raise/lower cycles; adjust tracking, belt o wrap, limits, alignment, and stored position ; and demonstrate proper operation to WPS Facilities staff. Remove packaging , debris, surplus material, and installation waste from the site. Leave the gymnasium clean and ready for use. o Include all freight, shipping, handling, delivery, equipment, lifts/scaffolding, labor, supervision, materials, and installation costs in the lump-sum proposal.