Site work and renovation of a water / sewer project in Salisbury, Maryland. Completed plans call for the renovation of a water / sewer project.

Interior coating of the Wor-Wic water tower. The Wor-Wic Water Tower is an approximately 152 foot tall , 500,000-gallon steel water tower. The City is requesting bids from qualified and experienced contractors to provide confined entry plan, furnish all labor, materials and equipment to remove existing interior coating on wet chamber, recoat wet chamber, and disinfection of wet chamber prior to filling. Scope of work items are not intended to imply a sequence of construction. A. Mobilization and demobilization B. Furnish all labor, materials, and equipment for demolition of existing wet chamber coating and installation of new coating system in the wet chamber. All coatings to shall be AWWA D102 and ANSI/NSF 61 compliant. 1. Existing coating system: Abrasively blast clean all interior surfaces to include all piping and seams in wet chamber to SSPC-SP 10/NACE No. 2, near-white metal blast cleaning with a surface profile of 1.5 mils. Refer to manufactures specifications for additional information. i. Successful vendor shall be responsible for coordinating with manufactures representative to certify surfaces are sufficiently prepared for new coating system. 2. New coating system: All coatings shall be installed per manufactures specifications. Successful vendor shall be responsible for coordinating with manufactures representative prior to any coating application and disinfection operations as necessary to satisfy warrantee requirements. i . Primer: Tnemec Series 93-H2O Hydro-Zinc with a dry film thickness of 2.5-3.5 mils. ii . Strip coat: Tnemec Series 21 Epoxoline. Strip Coat must be brushed/rolled or sprayed and back rolled. iii . Finish coat: Tnemec Series 21 Epoxoline with dry film thickness of 16-20 mils in two spray coats. Bid Documents are available for inspection and download via our web site, MENU; Procurement Portal ; Procureware; Bids. Question Deadline 12/01/2026 All modifications and every request for any interpretation must be addressed to the Director of Procurement, City of Salisbury, 125 N. Division Street,Room 104, Salisbury, Maryland 21801, and to be given consideration, must be received at the above address at least seven (7) days prior to the date fixed for the Bid Document opening. Questions regarding Bid documents or procedures should be referred to Michael Lowe, Senior Buyer, during normal business hours, at 410-548-3192, or via email at mlowe@salisbury.md .