Site work and paving for a road / highway in Richmond, Maine. Completed plans call for site work for a road / highway; and for paving for a road / highway.

**As of March 25, 2022, this project has been awarded to All States Construction, Inc. and the awarded amount is $68,578.85.** The project involves hot mix asphalt paving and installing gravel shoulders on Mitchell Road. A bid security in the amount of 5% of the total bid in the form of a Bid Bond or certified check, made out to the Town of Richmond. The successful bidder must furnish the following: 1. Certificate of Insurance (in accordance with Section 3, Article 26) 2. 100% Construction Performance Bond 3. 100% Construction Labor and Material Payment Bond The Town of Richmond will have sixty (60) calendar days within which to accept or reject any bid. The work shall be completed by August 26, 2022. Liquidated damages in the amount of $250 per day are contained in the Contract. The Town of Richmond reserves the right to adjust the quantities contained in the Bid Form as needed in order to stay within the project budget. The Town of Richmond reserves the right to reject any and all bids, to waive any technical or legal deficiencies, and to accept any bid which is deemed to be in the best interest of the Town of Richmond, not necessarily the lowest bid. Work under this contract includes all work required for hot mix asphalt paving for the Town of Richmond. In general, the work involves shim and surface paving, gravel shoulders, as well as incidental items. Contractor is required to complete all work required by the Specifications to effect a complete job. B. Specific items of work are included, but are not limited to: a. Installing butt joints at all pavement matches including paved driveways. b. Installing hot mix asphalt pavement for shim course, including tack coat. c. Installing hot mix asphalt pavement for surface course, including tack coat. d. Handwork paving for driveway matches and aprons at mailbox locations where needed. e. Installing gravel shoulders (2 feet wide) and gravel driveway matches. f. Traffic control and construction signage. g. Other incidental items required to complete the project Specific work areas are listed below: 1. Mitchell Road (20' paved width x 2,710 LF) - Shim & Overlay a. Hot mix asphalt variable depth shim (9.5 mm) b. Hot mix asphalt surface pavement (1-1/4" of 9.5 mm) c. Hot mix asphalt pavement to match driveways, with butt joints (1-1/4" of 9.5 mm) d. Gravel shoulders - 2 feet wide, along with gravel to match gravel driveways. e. Traffic control