Renovation of an educational facility in Milwaukee, Wisconsin. Completed plans call for the renovation of a educational facility.

General Construction Plumbing Work Electrical Work HVAC Work Drawings, project manual, and other bid documents may be viewed and ordered online by registering at the Reprographic Technologies' Planwell Online. Telephone orders will also be accepted; phone numbers below. The cost of the documents is dependent upon their size. Please call Reprographic Technologies, 414-384-1630 or 800-236-8162, for pricing of this document set. Documents may be picked up in person at the Office of Reprographic Technologies, 3942 W. Burnham Street, Milwaukee, WI 53215, however, documents must be ordered/purchased before they will be available for pickup. A Bid bond or certified check equal to 10% of the bid must accompany each bid. All bids and bonds must be on blank forms provided for that purpose, and the amount of the bid shall be stated in writing and in figures. Bids should be submitted in a sealed envelope provided for that purpose, and branch of work (all inclusive single prime for this project) and reference number must be indicated on the outside of the envelope. Bids must be guaranteed and cannot be withdrawn for a period of sixty days following the date of opening. The following forms must accompany each bid: "Disclosure of Ownership" (if applicable), "Affidavit of Noncollusion and/or Conflict of Interest". Blank forms for that purpose are provided with the bid package. There is a goal of 18% for the participation of Historically Underutilized Businesses (HUB) in this contract. The successful bidder will be required to provide a list of HUB firms participating in the work as part of the post bid submittal to MATC. See HUB Participation Guidelines and Instructions to Bidders. The apprenticeship requirements for this project are as follows: Apprentices are mandatory from the five (5) of the following eleven (11) trades: General Laborer; Carpenter; Drywall Taper or Finisher; Painter; Cement Finisher; Sheet Metal Worker; Electrician; Glazier; Plumber; Steamfitter; Temperature Control Installer. The successful bidder will be required to provide a list of Apprentice Categories from those listed above which will be utilized during this period. This list must be provided as part of the post bid submittal to MATC. See Apprenticeship Participation Requirement Guidelines and Instructions to Bidders. The Board reserves the right to reject any and all bids, waive informalities, or accept any bid which it may deem to be in the best interest of the Board.