Site work, paving and new construction of a mixed-use development in Fresno, California. Completed plans call for site work for a transportation facility; and for the construction of a 318,000-square-foot, four-story above grade, 920-space parking garage.

*Please contact the awarded design/builder for access to the bid results. This project at the Fresno-Yosemite International Airport is for a 4-story, new construction, cast-in-place parking structure of approximately 318,000 gross SF and will provide 920 stalls. The Automated Parking Guidance System is intended to facilitate a more efficient flow of traffic and provide stall availability/counts. Please note that there is no solar canopy currently in scope, but may be added in the future. Only camera-based, single-space APGS solutions with LPR capability will be considered. The delivery model for the APGS system will be Design-Build by the vendor. Owner requires an APGS installation method in which all required conduit, junction boxes, and wiring required to interconnect all APGS equipment are pre-embedded in the cast-in-place concrete structure. Owner does not want exposed UnistrutTM or similar custom track systems to be used. As such, proposers are required on a mandatory basis to identify and describe in their proposal a compliant approach for such installation, including a conduit layout plan and the associated installation prices assuming this method of construction. The winning bidder will also be required to promptly coordinate with the construction team immediately upon award and produce appropriate Construction Drawings and other Submittals regarding type and placement of all pre-embedded pathways. Time will be of the essence in providing the aforementioned Construction Drawings and other related Submittals in order to not delay the pouring of the concrete decks. There is a Project Labor Agreement in effect and the selected bidder will need to be compliant. The APGS system installation is expected to commence in the 3rd quarter of 2021.