Renovation of an educational facility in Munnsville, New York. Completed plans call for the renovation of a educational facility.

Procurement and general requirements; renovations to the existing entrance vestibules to provide a single-point, secured entrance; replacement of the ADA concrete pads at the main entrance; vehicular protection at the lower entrance near the cafeteria, and all other work and related materials as indicated on the Contract Drawings, as specified herein, and as required for the complete and proper execution of the Work. This outline is a general indication of the requirements of this Contract and is not intended to be all inclusive. The complete Contract Documents in their entirety, to include any and all addenda, form the basis of the responsibility of this Contract. Provide all labor, items, articles, materials, operations, methods or equipment listed, mentioned, indicated or scheduled on the drawings and specified herein, and as required to complete the electrical work. Contract drawings and specifications are complementary and must be so construed to determine the full scope of work. References to codes, specifications, and standards called for in the specification sections and on the drawings mean, the latest edition, amendment and revision of such referenced standard I code in effect on the date of these contract documents. Contract Drawings are, in part, diagrammatic and are intended to convey the scope of the work and indicate the general arrangement of the equipment. Follow these drawings in laying out the work. Consult all drawings of all trades to become familiar with all conditions affecting the work and to verify spaces in which the work will be installed. Reasonable changes required by job conditions (including offsetting of conduits around beams, etc.) shall be made, after obtaining the Engineer's approval, at no additional cost to the Owner.