Site work and new construction of a clubhouse / community center in Orangeburg, New York. Completed plans call for the construction of a clubhouse / community center.

Each proposal submitted must be accompanied by a certified check or bid bond, made payable to the TOWN OF ORANGETOWN, in an amount equal to five percent (5%) of the total amount of the bid, as a commitment by the bidder that, if its bid is accepted, it will enter into a contract to perform the work and will execute such further security as may be required for the faithful performance of the contract. Certification of bonding company is required for this bid, See Instructions for Bidders section. It is the Town of Orangetown intention to award the contracts to the lowest qualified bidder who can meet the experience, technical and budget requirements. The Town of Orangetown reserves the right to reject any or all bids, waive any informality and to accept such bid which, in the opinion of the Town of Orangetown, is in the best interests of the Township. Bids include all costs associated with the project. By submitting a bid, the bidder represents that they are familiar with the site and project conditions. Additionally, prior to submitting its bid, Contractor shall make Architect and Owner aware of any problems and/or inconsistencies in the bid documents. The purpose of the project is the development of an appoximately 21,000sf Community Center per the contract documentsOrangetown Community Center - New Building CONTRACT E WORK- 1. Provide, install, maintain, and repair, if necessary, temporary power and light throughout the site and Contractor and Architect/Engineer's field office. Temporary power shall be provided at location(s) selected by the Architect/Engineer based on input by the General Contractor. 2. Arrange for and install primary electric service. 3. Main secondary feeders, power distribution, and instrumentation control wiring. Provide, mount, and install electrical conduit, wire, fittings, boxes, panels, and electrical accessories. 4. All clearing, excavation, filling, and backfilling associated with the installation of underground conduit, duct bank, or wiring. 5. Emergency generator hook up and ATS for temporary or future emergency generator. 6. Motor control centers, local control stations, transfer switches, power distribution panels, breakers, lights, and switches. 7. Setting of electrical sleeves and/or embedded conduit in all concrete construction. All conduit for new construction shall be embedded in concrete slabs, decks, or walls. 8. Electrical connections (final termination) to all equipment, control panels, ventilating equipment and electrical devices. 9. Startup participation for the various equipment and systems of the project and provide complete service to troubleshoot and assist manufacturer service representatives in obtaining a completely functional installation. 10. Project closeout submittals.