Site work and paving for a civil project in Laguna Beach, California. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

In general, the work comprises of mobilization, clearing & grubbing, sawcut, removal and reconstruction of asphalt concrete (A.C.) pavement, grind and overlay, removal and replacement of A.C. berms and curbs, Caltrans traffic loop replacements, weed killing and crack sealing, application of Type I slurry seal, traffic control, storm water pollution prevention, pavement striping and markings, utility adjustments, and other miscellaneous improvements as required to complete the contemplated scope of work in The Village, Hobo Canyon (Additive Area A) and Diamond-Crestview (Additive Area B) neighborhoods in the City of Laguna Beach. No contractor or subcontractor may be listed on a bid proposal for a public works project (submitted on or after March 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5 [with limited exceptions from this requirement for bid purposes only under Labor Code section 1771.1(a)]. No contractor or subcontractor may be awarded a contract for public work on a public works project (awarded on or after April 1, 2015) unless registered with the Department of Industrial Relations pursuant to Labor Code section 1725.5. This project is subject to compliance monitoring and enforcement by the Department of Industrial Relations. Striping Inventory, Tie-Out Seal Existing Asphalt Pavement Cracks Clearing & Grubbing Sawcut & Remove Existing, and Construct 6" AC Pavement, per square foot Additional 1" of Remove Existing and Construct AC Pavement in excess of 6", per square foot Cold Mill Existing AC Pavement (2") and Construct AC Overlay (2"), per square foot Remove Existing Native Material and Construct Miscellaneous 4" AC Paving at road edge, per square foot Sawcut & Remove Existing, and Construct AC Berm (2.5" x 18"), per lineal foot