These Specifications are for the furnishing and placing of all permanent asphalt concrete,
rubberized asphalt concrete, and Portland cement concrete (PCC) paving in utility cuts and
trenches and the installation of concrete curbs, gutters, sidewalks, driveways, gate cans,
channelization, and miscellaneous appurtenant work for the Water and Power Department of
the City of Pasadena.
Work will be ordered by the Water and Power Engineer issuing paving lists which will specify
the locations of paving work, the types of work to be performed, and the nominal dimensions or
the limits of the work required. Each paving list shall constitute a Notice to Proceed with the
work described on the list. Contractor shall proceed with the performance of the work specified
on each list within 48 hours, and will complete such work within the time specified on each list
and per Specification. Contractor shall endeavor to complete each paving list prior to starting on
a new list. Contractor shall report to the General Manager or his/her appointed representative
each week for all work completed during the prior week. Work will be done under Excavation
Permits obtained by the Water and Power Department.
Contractor shall perform work after the issuance of the paving list from the Water and Power
Engineer only. Performing work on streets not on the approved paving list or work performed
without prior written approval from the Water and Power Engineer shall not be paid. Any
deviation or increase in the limit of work shall require approval from the Water and Power
Engineer. Any deviation or increase in the limit of work not authorized by the Water and Power
Engineer, shall not be paid.
The words "State Highway" herein refers to the Standard Specification of the State of California,
Department of Transportation. The words "Standard Specifications" herein refer to the
Standard Specifications of the Public Works Construction
.webp)
