Site work and paving for a mixed-use development in N Saint Paul, Minnesota. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; sidewalk / parking lot; and water / sewer project.

As of February 12 2021 this project has an awarded bidder. The Work consists of furnishing all labor, materials, equipment, skills, and performing all operations required to fully construct the Work. The Work includes, but is not limited to, mobilization and demobilization at multiple sites; installing erosion controls BMPs, silt fence, sediment logs, floatation silt curtain, inlet protection, erosion control construction entrances, control of water and/or dewatering to perform work; removal of trees, stumps, vegetation, and debris; excavation/dredging/ditch cleaning with off-site disposal to landfill of sediment/muck/vegetation from storm water detention ponds, channels, inlet pools, culvert ends; removal of sediment/muck/vegetation from storm water modular block paver basins with off-site disposal of materials, repair rock filter; debris cleaning along and between slots of timber weirs; repair/replace riprap at inlet/outlet structures; removal and replacement of filter rock, fabric and plastic fencing; removal and replacement of existing concrete weir in manhole; removal and replacement of existing RCP storm sewer piping and connections to existing RC manhole structures; construction of two test upflow treatment cells; installation of bypass drain piping system around existing spent lime basin; earthwork and grading to repair existing berm; channel cleanout dredging and regrading, mud mat protection on access over water lines; storm sewer repairs and filling of sink holes and erosion, installation of pavers along bituminous trail, general site work; control of traffic at and around construction sites, site restoration/seeding with native seed mixes provided by Owner; installing erosion control blanket on all exposed soils. Clean-up of sites and removal/disposal of temporary erosion control BMPs at the completion of Work, all as provided for in the Bidding Documents. All quantities and work items in this advertisement for bid are approximate and not guaranteed. Please make your check payable to Barr Engineering Co. and send it to 4300 MarketPointe Drive, Bloomington, Minnesota 55435. Please contact us at Phone: 952-832-2770; or Fax: 952-832-2601 if you have any questions. Partial sets of documents will not be issued.