Renovation of a municipal facility in Glenview, Illinois. Completed plans call for the renovation of a municipal facility.

A two-phased approach to replacing temperature control valves at the Glenview municipal center. Phase 1 will include the installation of isolation valves. Phase 2 will include replacing temperature control valves. All bids shall be accompanied by a Bid Bond for not less than five percent (5%) of the bid amount. The successful bidder must furnish a satisfactory performance and payment bond in the full amount of the bid. A scanned copy of the bid bond must be included in the pdf file submission. The original bid bond must be mailed to the Village Hall, 2500 East Lake Avenue, Glenview, IL 60025 attention Purchasing Manager. The Village recommends using certified or priority mail options in order to have a tracking number. All work under this contract shall comply with the Prevailing Wage Act of the State of Illinois, 820 ILCS 130/0.01 et seq. & the Employment of Illinois Workers on Public Works Act (30 ILCS 570/0.01 et. seq). Offers may not be withdrawn for ninety (90) days after closing date without the consent of the Board of Trustees. Any Bid submitted unsigned, via mail, via in person delivery, via fax, via email or received subsequent to the aforementioned date and time, may be disqualified and returned to the bidder. The Village of Glenview reserves the right to reject any and all bids or parts thereof, to waive any irregularities or informalities in bid procedures and to award the contract in a manner best serving the interest of the Village All purchasing questions can be addressed to Erika Smith, Budget and Purchasing Manager, at (847) 904-4337 or Brent Strumpf, Budget and Purchasing Analyst, at (847) 904-4336 or email purchasing@glenview.il.us. The deadline to submit questions Dec 18, 2020 , 5:00 p.m o The approximate system volume is 1,200 gallons, +/- 10% o Ethylene glycol is to be used in lieu of propylene glycol o The system can be reclaimed and reused as a long as the water is tested and in compliance with system specifications o Valves do not need to be insulated