Renovation of an educational facility in Menomonie, Wisconsin. Completed plans call for the renovation of a educational facility.

Effective January 1, 2014, all potential bidders must be certified by DOA prior to submitting bids on state construction projects over $50,000. All bids received from contractors who are not certified will be rejected.Contractor certification applications and instructions for completing the form may be obtained from the DOA portal. This project is being let using a new single prime bidding and contracting process. DFD will publicly bid the applicable mechanical, electrical, plumbing, and fire protection (MEP) divisions of work first. Within 5 days of the MEP bid opening, DFD will identify a lowest, qualified, responsible, certified bidder in each applicable MEP division of work. These successful MEP bids must be included in all general prime contractor bids received. No later than 5 days after DFD identifies the successful MEP bids, DFD will publicly open general prime contractor bids. General prime contractor bids that do not include the successful MEP bids will be rejected. The state will enter into a single contract with the lowest, qualified, responsible, certified general prime contractor and this general prime contractor will enter into subcontracts with the 33 successful MEP bidders. In general, the work consists ofreconfiguration of approximately 11,056 GSF to accommodate the relocation of the Apparel from Heritage Hall in addition to Engineering Technology space needs. The scope includes updates to classrooms and lab amenities and increase the visibility of the student course work in Fryklund Hall and Communication Technology buildings. The remodel of these spaces includes the following scope: Removal of an existing General Classroom from Level 3 Fryklund Hall.Reconfiguration of an existing CADD Lab, Sketch Lab and Apparel Production Lab on Level 3 Fryklund Hall into the following: (2) Maker Labs49 o(1) CADD Lab(1) Conference RoomReconfigure of an existing Lab on Level 2 Comm Tech into the following:(1) Maker Lab(1) Testing Lab The project demolition scope includes demolition of CMU partitions and interior finishes, sinks, operable partition, HVAC and electrical systems. The project architectural remodeling scope includes construction of walls, floor and ceiling finishes, display cabinets, doors and windows. The project infrastructure remodeling scope includes some plumbing, HVAC modification, Humidification Unit, electrical, low voltage and lighting systems. Bidder shall identify the division of work they are bidding on when requesting Bidding Documents online. Base Bids will be received as a single lump sum bid for: 2) Fire Protection (Fire Suppression); 3) Plumbing; 4) Mechanical (Heating, Ventilating, Air Conditioning); and 5) Electrical. No deposit is required to obtain documents for bidding purposes. Bid Guarantee in the amount of 10% of the Bid must accompany each bid submitted. If pandemic response measures permit, individual or limited group (as defined by agency) in-person tours may be scheduled with the Agency contact post pre-bid meeting: Gary Gust, UW-Stout Campus Planner, (715)232-5394, or gustga@uwstout.edu