Renovation of a mixed-use development in New York, New York. Completed plans call for the renovation of a educational facility.

All questions by prospective bidders should be directed in writing at least three (3) business days prior to the originally scheduled, or, if applicable, postponed bid opening date to Ms. Iris Vega, SCA Contract Administration at E-mail address: ivega@nycsca.org, Phone Number (718) 472-8292. Over $4M 1. Removal of the existing Boiler Plant which includes but is not limited to the following: 2-boilers, 2- burners, 2-boiler control panels, all breeching, 2-fuel oil tanks, oil heaters, duplex oil pumps, 1- boiler feed unit, 2- vacuum pumps, compressed air/pneumatic system and all associated controls, equipment pads, all equipment and piping indicated on plans. Removal of all supports, motors, starters, conduit, etc. associated with the above mentioned equipment and piping. Removals of existing accessories for H & V Units including but not limited to control valves, steam traps, drip traps, pneumatic thermostats and pneumatic actuators. Removals of existing convectors/radiators including but not limited to pneumatic control valves, steam traps, shut-off valves and pneumatic thermostats Removals of drip trap assembly throughout the Cellar floor and Tunnel. Removals for existing garbage compactor including but not limited to piping, ductwork and supports Removals for existing incenerator including but not limited to piping, ductwork and supports Furnishing & installation of new boiler plant gas-fired fire box boilers) including 2- boilers, 1- boiler feed unit system, 2- vacuum pumps, 1- chemical feed system, breeching, combustion air intakes, intake louvers, piping,insulation, control 2- panels, etc., and as shown on drawings. Furnishing & installation new stand alone DDC control system, including electronics thermostats, DDC control valves, DDC control panels, control transformers, electronics damper actuators etc. asindicated on the drawings. Furnishing and installation of H & V units accessories including but not limited to steam piping, shut off valve, steam drip assembly,control valves, F&T traps, thermostatic traps, control panels, damper actuator and as shown on drawings