Site work for a water / sewer project in Chesterfield, New Jersey. Completed plans call for site work for a water / sewer project.

Single Bid (lump sum all trades) General Construction (C008) or General Construction / Alterations & Additions (C009) $1,126,152 IN ACCORDANCE WITH N.J.S.A. 52:32-2, THIS PROJECT SHALL BE BID AS A SINGLE BID (LUMP SUM ALL TRADES). BIDDER MUST BE CLASSIFIED THEMSELVES OR NAME THEIR CLASSIFIED SUBCONTRACTOR(S) FOR THE FOLLOWING TRADE(S): Electrical (C047) Failure To List Classified Sub-Contractors Will Deem The Bid Non-Responsive. Pursuant to N.J.A.C. 17:13, this project has been designated as a Small Business Set-Aside Opportunity. This contract includes a goal of awarding 25 percent of the total contract value to either a prime or subcontract level. The firm determined to be the lowest responsible bidder must produce copies of approval notice from the Division of Revenue and Enterprises Services designating the prime or subcontracting firm as a Small Business Enterprise prior to the award of contract. All questions concerning the Small Business Set-Aside Program should be addressed to: Division of Revenue and Enterprises Services Small Business Enterprise Department of the Treasury 33 West State Street, 5th Floor P.O. Box 026 Trenton, NJ 08625-0026 Phone: 609-292-2146 Bidders must be classified by the Division under N.J.S.A. 52:35-1 et seq and must submit bid security as provided in Instructions to Bidders and General Conditions, Revised December 2015. No bidder may withdraw his bid for 60 calendar days after the opening. The State may reject any and all bids. Bidders are required to comply with the requirements of N.J.S.A. 10:5-31 et seq. and N.J.A.C. 17:27. The Work of Project is defined by the Contract Documents and consists of the following: 1. The construction and installation of potable water infrastructure improvements SCOPE OF WORK A. The Contractor shall submit shop drawings on all equipment and materials, structural details, piping layouts and all miscellaneous items to be incorporated into the Work. All shop drawings shall be submitted using the transmittal form furnished by the Engineer. B. Such drawings shall show the principal dimensions, weight, structural and operating features, space required, clearances, type and/or brand of finish or shop coat, grease fittings, etc., depending on the subject of the drawing. When it is customary to do so, when the dimensions are of particular importance, or when so specified, the drawings shall be certified by the manufacturer or fabricator as correct for the Contract. As part of the shop drawing submittal, submit a list with the names, identification numbers, and quantities of spare parts, instruments, and equipment to be provided by the Contractor. C. When so specified or if considered by the Engineer to be acceptable, manufacturer's specifications, catalog data, descriptive matter, illustrations, etc., may be submitted in place of shop and working drawings. D. The Contractor shall be responsible for the prompt and timely submittal of all shop and working drawings so that there shall be no delay to the Work due to the absence of such drawings. Prior to the submittal of any shop drawings, the Contractor shall submit a schedule of proposed shop drawing transmittals. The schedule shall identify the subject matter of each transmittal, the corresponding specification section number and the proposed date of submission. During the progress of the Work the schedule shall be revised and resubmitted as necessary. E. The Contractor shall review shop drawings and product data, including those by subcontractors, prior to submission to determine and verify the following: 1. Field measurements, 2. Field construction criteria. 3. Catalog numbers and similar data. 4. Conformance with the Specifications All questions regarding registration shall be addressed to: Contractor Registration Unit New Jersey Department of Labor Division of Wage & Hour Compliance P O Box 389 Trenton NJ 08625-0389 Telephone: 609-292-9464 FAX: 609-633-8591