Site work and paving for a transportation facility in Jacksonville, Florida. Completed plans call for site work for a transportation facility; and for paving for a transportation facility.

The project consists expanding the existing Cargo Apron at Jacksonville International Airport. The apron expansion includes the demolition of the existing asphalt pavement and electrical lighting systems, unclassified excavation, embankment, and construction of concrete and asphalt pavement. The concrete expansion is 4,800 SY and composed of 12 compacted subgrade layer, 6 porous aggregate blanket, 7 Lean Concrete Base Course, and 16 PCC surface course. The project also includes removal of existing drainage structures and installation of underdrains, an MES, a catch basin, and drainage pipe. Other work items included are pavement marking removal and application, erosion and sedimentation control and improvement of the existing haul route. There will be a site visit immediately following the meeting. Bid security in the amount of five percent (5%) of the base bid will be required to accompany bids. Contract Bonding shall also be required. The Owner reserves the right to reject any or all bids and to waive irregularities in bidding. The Authority has determined that Six percent (6%) DBE participation goal will be prescribed for this project. As a good corporate citizen, JAA fully supports the usage of DBE on JAA projects. We encourage our business partners to maximize the utilization of DBEs at every opportunity. This project will be bid as a single contract. Bid prices may be held for up to 90 days. It is the sole responsibility of each prospective bidder to assure that the Office of the Manager, Engineering & Construction, is kept informed of his or her current mailing address, telephone number and fax number. Complete sets of drawings and specifications may be acquired from JACOBS through file transfer. Contractors may email Lasa Ennis (Lasa.Ennis@Jacobs.com) to obtain a complete set of drawings and specifications. Partial sets of drawings and specifications will not be issued. The final day for questions is Friday, October 22nd at 5:00 PM.