Site work and paving for a civil project in Plymouth, Massachusetts. Completed plans call for site work for a road / highway; for paving for a road / highway; and water / sewer project.

Sealed bids are sought by the Town of Plymouth for the replacement of an existing 6-inch jacket and cast-iron water main, installation of approximately 2,100 linear feet of new 8-inch ductile-iron water main, new hydrants, gate valves, water service connections, trench pavement, curb to curb mill and overlay, and all necessary and incidental appurtenances to complete this work on Doten Road and Winter Street. sstrassel@plymouth-ma.gov Do not notify email address listed when final publish date assigned. The Work shall consist of furnishing all labor, equipment, materials, tools, apparatus, and all other incidental work required to complete the installation of the new water mains, installation of new services, and transferring existing services from the old mains as specified and shown on the Drawings. The Work shall include, but not necessarily be limited to the following: Furnishing and installation of all piping, fittings, valves, hydrants, thrust blocks, restrained joints, couplings, appurtenances and service connections as shown on the plans and as directed by the Engineer required for the installation of the new water main. 2. Perform all required testing and disinfection of the new water mains. 3. Furnishing and installation of all temporary bypass piping, including temporary service connections as shown on the plans and as directed by the Engineer. 4. Adjustments/repairs and/or replacement of utility appurtenances (grates and covers, gate boxes, etc.) and other related work, as specified or directed by the Engineer. 5. Removal and proper disposal of all trench and pipe materials encountered and removed to facilitate construction. 6. Furnishing all materials and performing all excavations, backfilling of excavated areas, and restoration of surface pavement. 7. Furnishing all labor, materials, and necessary equipment to loam and seed disturbed areas as shown on the drawings including all costs associated with the excavation and disposal of unsuitable material in areas to receive loam and seed. 8. Installation of bituminous concrete trench pavement as specified or as directed by the Engineer. 9. Restoration of roadways, sidewalks, driveways, granite curbs and berms, and landscaped areas as shown or as directed by the Engineer. 10. Furnishing, installation, and maintenance of all traffic control and safety measures during the construction period, including signs, barricades, detours, maintenance of safe vehicular and pedestrian access to abutting properties, businesses and commercial establishments and assuring an uninterrupted supply of utility services to all public amenities, businesses and abutters within the project area, at all times. 11. Maintenance and repair of all work for a period of one (1) year following the issuance of the Certificate of Substantial Completion. 12. Work, materials, equipment, and storage areas, which are necessary for construction, but which are not specifically referred to in the Specifications or shown on the Drawings, but implied by the contract, shall be furnished by the Contractor at his own cost and expense, and shall be such as will correspond with the general character of the Work, as may be determined by the Engineer or Owner, whose decisions as to the necessity for and character of such work and materials shall be final and conclusive. It is the intent of these Specifications to produce a complete, finished job, whether shown in every detail or not. 13. Furnishing all materials, labor, and equipment for the relocation, protection, or temporary disturbance of existing utilities (i.e. water, electric, drain) to permit water main improvement activities.