Work includes the installation of eight-inch, 10-inch, 12-inch, 15-inch and 18-inch Cured-in-Place sewer pipe lining and polyvinyl chloride point repairs with heavy cleaning and laterals seals. Award Information: Not Applicable
Work Classification: F6 The Contractor shall (within specified tolerances) perform all Work in accordance with the Contract Documents including, but not limited to, the lines, grades, typical cross sections, dimensions, and other data shown on the Plans or as modified by Contract Modification including the furnishing of all Materials, implements, machinery, Equipment, tools, supplies, transp01iation) labor, and all other things necessary to the satisfactory prosecution an completion of the Work in full compliance with the Contract Documents. The Contract Documents are intended to be complementary, and to describe the Construction and completion of the Work. Anything mentioned in the Contract Documents and not shown on the Contract Drawings, or shown on the Contract Drawing, and not elsewhere mentioned in the Contract Documents shall be of like effect as if it is shown or mentioned in both. Omissions from the Contract Documents including, but not limited to, Contract Drawings or the misdescription of details of Work which are manifestly necessary to carry out the intent of the Contract Documents and/or Contract Drawings or which are customarily performed shall not relieve the Contractor f rom performing such omitted or misdescribed details of Work, but they shall be performed as if fully and correctly set forth and described in the Contract Drawings and Contract Documents. The Engineer shall consider modifications of the Bid and/or postponement of Bid opening as may best serve all interested parties where Written Notice of apparent omissions is received by the Engineer five (5) Business Days before the hour prescribed for Bid opening. This is not to be construed as a limitation on the Engineer. If justified and deemed appropriate by the County, the Engineer may issue a Contract Modification or, if after execution of the Contract, prepare a Supplemental Agreement(s) for Extra Work that was not anticipated and/or shown on the Contract Drawings or described in the Contract Documents. Work described in words that have a well-known technical or trade meaning shall be held to refer to such recognized standard use. The Contractor shall keep in the office on the Work site a complete set of all Contract Drawings, Standard Specifications) shop drawings, schedules, etc., in good order and available to the Engineer and representatives of the County.
.webp)
