Site work and paving for a road / highway in Lecanto, Florida. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Method 1 is to be used on roads constructed with soil-cement base, which entails placing 1.5 of Hot Open Grade Mix as a leveling course (See attachment E ) and then placing 1 of SP-9.5 (Fine) with Reclaimed Asphalt Pavement (RAP) and PG 76-22 Asphalt Binder (binder) per FDOT Section 334-2. Milling at driveways will be performed as needed. Method 2, for non-soil cement-based roads, consists of placing an average of 1 , depending on condition of the road, turnout, or intersections as determined by the County, of SP-9.5 (Fine) with RAP and PG 76-22 binder per FDOT Section 334-2. The asphalt to be provided for the project shall be FDOT pre-approved and identified on the current FDOT Asphalt Mix Design Plant Assignment Sheet. Work includes, but is not limited to, exposing and cleaning edge of existing pavement, milling, paving, temporary and permanent pavement markings, redressing, installing new R.P.M.s, shoulder grading (contractor is responsible for providing positive drainage away from the roadway surface), sodding, and other items as specified in the Contract Documents for approximately 41 miles of roadway in Citrus County, Florida.