Renovation of a municipal facility in Oakville, Ontario. Completed plans call for the renovation of a municipal facility.

The supply and installation to retrofit washroom fixtures from a touch to a touchless operation in various town facilities. The scope for all the facilities will involve replacing or retrofitting toilet and urinal flush valves, toilet seats as well as replacing bathroom sink tap sets. The purpose of this project is to retrofit faucets and flush valves in washrooms in various Town buildings to touchless operation. This will involve replacing or retrofitting toilet and urinal flush valves as well as replacing bathroom sink tap sets. Table 1 summarize the work that is to be carried out at each location. The information in Table 1 was gathered by various Town staff members so is subject to some interpretation and potential errors. The Contractor is to supply and install the actual material needed for each conversion. Where possible all flush valves and faucet sets installed under this contract are to be from the same manufacturer in order to simplify future maintenance. The primary manufacturers of touchless toilet valves do not appear to make a model that works with tank toilets so these can be provided by a different manufacturer. All installation work is to be carried out under the supervision of plumbers licensed in Ontario to complete work on commercial buildings. Documents can be obtained at: https://oakville.bidsandtenders.ca Question Deadline: Wed Jan 5, 2022 3:00:00 PM (EST)