Renovation of an educational facility in Jacksonville, Illinois. Completed plans call for the renovation of a educational facility.

Removal of asbestos tiles and installation of new tiles. 1) Removal of asbestos floor tiles and cove base molding in rooms 201 includes bathroom, 204 includes bathroom ,205, 206, and 207 of Building 17 on Illinois School for Visually Impaired campus using infrared heat machine and low odor chemicals for mastic removal. Each room is approximately 625 square foot. Contractor will be responsible for the complete removal and proper disposal of the existing tile, molding, and mastic. Fan coil units in each room 2 per room will need to be removed from wall and tile underneath the unit will need to be removed and replaced once they are replaced the fan coil unit needs to be reattached to the wall. 2) Contractor will be responsible for any electrical hookup necessary for the equipment needed. This floor of the building does not have 220 volt hookup. 3) Contractor will be responsible for following all proper procedures, methods of containment, and abatement. 4) Contractor is responsible for obtaining ALL necessary permits- including permits from Regional Office of Education (ROE) or Illinois State Board of Education (ISBE). 5) Contractor will provide and install new 18 x 18" Aspecta, Highland Step in the color of Donn and pattern of #1912175, or the equivalent there of, room # 201 including bathroom floor, room # 204 including bathroom floor, and room #'s 205, 206, and 207 of Building 17. Each room is approximately 625 square feet. The new floor tile and adhesive must be approved for use in schools. 6) Contractor will provide and install new vinyl cove molding in room # 201 including bathroom, room # 204 including bathroom, room #'s 205, 206, and 207 of Building 17. Each room will use approximately 95' foot of molding. 7) All materials must meet current safety standards and requirements. 8) Contractor to take in consideration that this is a school for visually impaired students and extra caution is to be taken while working on the school's campus - including setting up a safe work area blocked off for safety of students. 9) Project to begin 30-60 days from notification of bid acceptance or as mutually agreed upon. Project to be completed by June 30, 2022. 10) Vendor must be licensed and insured. 11) 5 year warranty to be provided from the date of customer acceptance. 12) Needs to be designed and oversight by a licensed asbestos designer and also must be full containment. 13) A Premium Bond will need to be aquired.