Site work and paving for a road / highway in Billings, Montana. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Montana Department of Transportation (MDT) is accepting bids for Overlay and Chip Seal Frontage Rd W of Columbus Billings Area Questions or information relating to either specifications or requirements of this Invitation for Bid shall be asked Electronically 3/4" Commercial Plant Mix Grade S PG 64-28 Quantities are estimated Cold Milling (avg. depth 0.15') Quantities are estimated Type 1 Chips 110, Quantities are estimated Liquid Emulsified Asphalt Grade Quantities are estimated Traffic Control Contractor will provide all labor, equipment, materials, incidentals and traffic control necessary to produce, haul, place, tack and compact approximately 11,850 tons of 3/4 " Commercial Plant Mix Grade S PG 64-28 asphalt mix material. The overlay shall be paved 0.15 feet thick and approximately 24 feet wide. Contractor shall provide all labor, equipment, materials, traffic control and incidentals necessary to produce, haul, place, roll and broom approximately 110,700square yards of laid-in- place chip seal. The chip seal will be approximately 7.7 miles long and 24 feet wide. Contractor shall provide CRS-2P asphalt emulsion and Type 1 chips. Traffic control with pilot cars must be maintained until dusk or fading light each workday as determined by the Project Manager. The emulsion application rate for chip seals is estimated at 0.42 gallons per square yard. The cover material application rate is estimated at 25 pounds per squareyard. Actual application rates will be based on the chip design and the actual field adjustments. If the cover material application rate of 25 pounds per square yard is not sufficient to provide a quality job, the Project Managers will jointly determine what the new application rate should be. Contractor must furnish a water truck for dust control and wetting of chips. Arrangements must be made by the Contractor for acquiring water for wetting and sweeping. Completion- AUGUST 31, 2022 Question Submission Close Date 12/29/2021 2:00 PM MST