Renovation of an educational facility in Glassboro, New Jersey. Completed plans call for the renovation of a educational facility.

Submissions will not be read in public due to the Covid-19 restrictions. For proposal inquiries, email bids@rowan.edu. All potential vendors/bidders are required to comply with the requirements of N.J.S.A. 10:5-31 et seq. and N.J.A.C. 17:27. Rowan University is an Equal Opportunity Employer. Please direct any questions to bids@rowan.edu or 856-256-4171. Vendor shall have experience in the fabrication, construction, installation, and repair of boiler equipment systems similar to the equipment in use at the University is required. Bidders shall be experienced in the following: 1. Tanks, Vessels, and Heat exchangers 2. Pipe lines for steam, fuel and condensate 3. High pressure boilers (drums & tubes), boiler castings & boiler refractories 4. Ducts and stacks. 5. Piping, valves (including safety valves, traps, strainers, assemblies and support units. 6. Fabrication of materials, including but not limited to carbon steel, austenitic stainless steel, austenitic ferrites stainless steel, chrome moly, Monel, titanium, aluminum and copper. B. Contractor shall possess a National Board Inspection Code certification "R" and "VR" for boiler and safety valve repairs respectively. C. Contractor shall be certified with the following ASME stamps; "S", "PP", "H", "HV", "V", "U", and "UV" as it relates to fired and unfired pressured vessels, and other pressurized systems. D. Contractor shall be OSHA 1926 certified for confined space, Lockout/Tag out, ladder safety, scaffolding, and hand tools at a minimum. E. Contractor shall be registered with the State of NJ Division of Building & Construction. F. Contractor shall perform all required pressure testing and hydrostatic testing upon completion of code repairs. G. Contractor shall provide a certified National Board Inspector to witness all code repair testing.