Site work and paving for a civil project in Wilkesboro, North Carolina. Completed plans call for site work for a bridge / tunnel; road / highway; for paving for a road / highway; and water / sewer project.

The U.S. Army Corps of Engineers, Wilmington District requires a contract for the Warrior Creek Roadway Repair located in Wilkes County, North Carolina. The project consists of removing a collapsed 24-inch corrugated metal pipe (CMP) culvert from a Warrior Creek Park roadway. The culvert is approximately 25 feet below the surface of the roadway and is approximately 130 linear feet (LF) in length. The project requires a licensed geotechnical engineer to develop an excavation plan for removal of the existing culvert. The Contractor shall replace the existing culvert pipe with a HDPE solid wall pipe SDR 17 that is 24-inch in diameter and approximately 130 LF. Additionally, the following shall be constructed: 1. Clearing and grubbing of roadway embankment 2. Remove and replace asphalt pavement 3. Remove and replace 1-inch diameter PVC waterline 4. Remove and replace 4-inch diameter PVC sanitary sewer pipe 5. Remove timber bollards and replace with timber guardrail 6. New riprap apron on lake side end of new 24-inch RCP culvert This solicitation is a 100% Small Business Set Aside. The contract issued will be Firm Fixed Price. The Magnitude of Construction of this project is between $500,000 and $1,000,000.00. This solicitation will be issued in electronic format only and will be available on or about 21 June 2022. The bid opening date will be specified in the solicitation when it is issued. No additional media (CD-ROM, floppy disks, facsimiles, etc.) will be provided. Paper copies of this solicitation will not be available. Other methods of requesting a package will not be honored. The North American Industry Classification System (NAICS) code is 237310 - Highway, Street, and Bridge Construction and the size standard is $39,500,000.00. Offerors must be registered in the System for Award Management (SAM) in order to be eligible to receive an award from any Government solicitation. Call 1-866-606-8220 for more information or visit the SAM website at http://sam.gov. After completing SAM, in order to download documents contractors and their subcontractors must register at http://sam.gov. In order to locate solicitation, Contractors can go to http://sam.gov and search for the solicitation number. Contractors can register to be put on a plan holders list that others can access through the http://sam.gov. website. It is the Offeror's responsibility to check the Internet address provided as necessary for any posted changes to this solicitation and all amendments. For additional information or assistance, please contact James Arnold, Contract Specialist, phone 910-382-1313, or email james.p.arnold@usace.army.mil or Ms. Rosalind M. Shoemaker at 910-251-4436, or email rosalind.m.shoemaker@usace.army.mil. PROJNET Solicitation/Technical Inquiries via ProjNet 1. Solicitation/Technical Inquiries. a. Inquiries are to be submitted via Bidder Inquiry at the ProjNet website at https://www.projnet.org . b. If you have technical problems accessing the Bidder Inquiry via the ProjNet website, contact the ProjNet Help Desk at 1-800-428-4357 (HELP). This number is for technical issues accessing the website ONLY. 2. Read this paragraph in conjunction with contract provision FAR 52.214-6, "Explanation to Prospective Bidders". 3. Any prospective bidder/offeror desiring an explanation or interpretation of the solicitation, drawings specifications, etc., must request it in writing via Bidder Inquiry in ProjNet within no less than ten (10) calendar days prior to the date of bid opening or receipt of proposals. The Government reserves the right to decline addressing questions received less than ten (10) calendar days prior to receipt of bid opening or receipt of proposals. 4. No Inquiries will be accepted by the Bidder Inquiry system within ten (10) calendar days prior to the date of bid opening. However, you may still access the Bidder Inquiry system to view answers/replies to previous inquiries until the bid opening. The U.S. Army Corps of Engineers, Wilmington District requires a contract for the Warrior Creek Roadway Repair located in Wilkes County, North Carolina. The project consists of removing a collapsed 24-inch corrugated metal pipe (CMP) culvert from a Warrior Creek Park roadway. The culvert is approximately 25 feet below the surface of the roadway and is approximately 130 linear feet (LF) in length. The project requires a licensed geotechnical engineer to develop an excavation plan for removal of the existing culvert. The Contractor shall replace the existing culvert pipe with a reinforced concrete pipe (RCP) that is 24-inch in diameter and approximately 130 LF. Additionally, the following shall be constructed: 1. Clearing and grubbing of roadway embankment 2. Remove and replace asphalt pavement 3. Remove and replace 1-inch diameter PVC waterline 4. Remove and replace 4-inch diameter PVC sanitary sewer pipe 5. Remove timber bollards and replace with timber guardrail 6. New riprap apron on lake side end of new 24-inch RCP culvert This solicitation is a 100% Small Business Set Aside. The contract issued will be Firm Fixed Price. The Magnitude of Construction of this project is between $500,000 and $1,000,000.00. This solicitation will be issued in electronic format only and will be available on or about 21 June 2022. The bid opening date will be specified in the solicitation when it is issued. No additional media (CD-ROM, floppy disks, facsimiles, etc.) will be provided. Paper copies of this solicitation will not be available. Other methods of requesting a package will not be honored. The North American Industry Classification System (NAICS) code is 237310 - Highway, Street, and Bridge Construction and the size standard is $39,500,000.00. Offerors must be registered in the System for Award Management (SAM) in order to be eligible to receive an award from any Government solicitation. Call 1-866-606-8220 for more information or visit the SAM website at http://sam.gov. After completing SAM, in order to download documents contractors and their subcontractors must register at http://sam.gov. In order to locate solicitation, Contractors can go to http://sam.gov and search for the solicitation number. Contractors can register to be put on a plan holders list that others can access through the http://sam.gov. website. It is the Offeror's responsibility to check the Internet address provided as necessary for any posted changes to this solicitation and all amendments. For additional information or assistance, please contact James Arnold, Contract Specialist, phone 910-382-1313, or email james.p.arnold@usace.army.mil or Ms. Rosalind M. Shoemaker at 910-251-4436, or email rosalind.m.shoemaker@usace.army.mil. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.