Renovation of an educational facility in Brenham, Texas. Completed plans call for the renovation of a educational facility.

All cabling to be minimum of Cat 6. 1.2 Provide a 20ft service loop above ceiling in room location. 1.3 Terminate with a "biscuit" box above ceiling of room location. 1.4 Terminate into a Keystone Patch Panel in MDF/IDF. 1.5 All network cabling to be labeled per the district standards. 1.6 All cables to be blue in color. 1.7 Cable and cable bundles will not be attached to any electrical wiring or light fixtures, nor will its deflection allow it to come in contact with ceiling grids, HVAC mechanical controls, light fixtures, or drainage line piping. The use of "J" hooks is the preferred means to avoid any of the above examples. "J" hooks should be fastened as high as possible so as not to interfere with any other building wiring or systems. 1.8 Use of loop-and-hook (Velcro) type fasteners is the preferred method to bundle together cables that are visible or below a false ceiling. If plastic tie wraps are needed to attach cable bundles to anchors, then tie wraps should be left loose fitting. Also, tie wraps should not be used on cable bundles exceeding 48 cables. 1.9 Category 6 Plenum cables will be installed for all interior environments. 1.10 The Contractor will provide a complete and final location table and spreadsheet indicating all jack locations. The Contractor will be responsible for updating BISD wiring documentation. Cable installations on existing frames will be documented. Quantities 165 - Cat 6 network drops. All materials and labor for installation into Brenham High School. Purchase Contingent Upon: Equipment will only be purchased if E-Rate funding is approved by USAC. Discounted Billing: Service provider must be willing to file FCC Form 474 (Service Provider Invoice) for discounted portion of equipment. Brenham ISD will only be invoiced for the remaining portion. Questions should be directed to: Rodney Leer Director of Information Technology 979-277-3760 rleer@brenhamk-12.net