Renovation of a detention facility in Montgomery, Alabama. Completed plans call for the renovation of a detention facility.

**As of March 15 , 2022, The project has not been awarded yet. A timeline for award has not been established yet. All bidders must attend this meeting. Bids must be submitted on proposal forms furnished by the Engineer or copies thereof. All bidders bidding in amounts exceeding the established by the State Licensing Board for General Contractors must be licensed under the provisions of Title 34, Chapter 8, Code of Alabama, 1975, and must show evidence of license before bidding or bid will not be received or considered by the Engineer; the bidder shall show such evidence clearly displaying his or her current license number on the outside of the seal envelope in which the proposal is delivered. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in the Owner's judgment, the best interests of the Owner will thereby by promoted. The State of Alabama Department of Corrections (Awarding Authority) Morris Engineering LLC 903 South Perry Street Montgomery, Alabama 36104 (Engineer) Mont. The CONTRACT TIME is ( 210 ) calendar days. DESCRIPTION OF WORK: A. Furnish all labor and materials required to complete the electrical work indicated on the drawings or herein specified. Major work included in Section 16 shall be: B. Arrange with the local utility companies for providing such electrical services as indicated on drawings or herein specified. Any charges for electrical service to the facility by the utility company shall be included in the contractor's bid price. C. Remove or relocate all electrical or electronic services located on or crossing through the project property, either above or below grade, which would obstruct the construction of the project or conflict in any manner with the complete project or any code pertaining thereto. D. Furnish and install a complete electrical light and power system including but not limited to the connection of all meters, switchboards, panelboards, circuit breakers, power outlets, convenience outlets, lighting fixtures, switches, and/or other equipment forming part of the electrical system. E. Furnish and install a complete system of outlet boxes, face plates, conduit raceways, backboard, and service entrance conduit for the communications system. F. Furnish and install a complete system of outlet boxes, face plates, conduit raceways, Category 6 cables, backboards, patch panels, and fiber optic cables and patch panels for the Data System. G. Connect all electrical equipment whether furnished by this contractor or by others. H. Furnish and install all disconnect switches not included as an integral part of equipment. I. Complete the alterations, additions, and renovations to the electrical system in the existing building as specified herein or as shown on the drawings. J. Procure and pay for permits and certifications as required by local and state ordinances and Fire Underwriters certificate of inspection. K. Visit the site and determine conditions that affect this contract. Failure to do so will in no way relieve the Contractor of his responsibility under his contract. L. Submit to the Architect a certificate of final inspection from local and/or state inspection authorities. M. Establish and maintain temporary electrical services for construction purposes.