Renovation of an educational facility in Oro Valley, Arizona. Completed plans call for the renovation of a educational facility.

***As of February 9, 2022 This project has not yet been awarded. A timeline for award has not yet been established.*** Offerors responding to this solicitation must be licensed in the proper category to perform the specifications requested in this IFB. Bids will be opened and the name of the Contractor and net bid amount will be publicly read aloud, as necessary, via a virtual public opening at that time. Notification of the virtual public opening will be sent to interested parties who email notification that they would like to attend the virtual public opening. Roof Replacement (Roof Tiles): a. Remove existing roof tiles and salvage for re-installation. Remove existing underlayment to the structural deck and dispose of per local requirements. b. Provide and install self-adhering sheet underlayment and re-install roof tiles as indicated on Drawings. Replace all missing, broken, or damaged tiles. c. Clean and remove all debris caused by new construction. d. Provide contractor's warranty and manufacturer's roof material and labor warranty as indicated in Specifications. e. The roofing manufacturer shall submit an "Intent to Warrant" document and that document shall be included in the bid / quote submission. f. Associated work as indicated on Drawings. 2. Roof Replacement (Built-Up Roofing): a. Remove existing built-up roof down to the structural deck and dispose of per local requirements b. Remove existing wall flashings and dispose per local requirements. c. Remove and replace all existing metal flashing, including but not limited to roof edge flashing, copings, base flashing, counterflashing, roof-penetration flashing, and parapet scuppers unless noted otherwise. d. Remove all wood and PVC blocks supporting ductwork and piping/conduit. All ductwork and piping/conduit on roof shall be supported using factory fabricated assemblies of solid base polycarbonate, high density polypropylene plastic, recycled tire rubber, galvanized, or stainless steel. e. Provide and install factory tapered crickets as required to create positive slope to drains and to eliminate ponding areas. f. Provide and install roof insulation as indicated on Drawings, adhered to structural deck per specifications, and cover board, adhered to roof insulation. g. Provide and install one layer of approved SBS-modified bitumen base sheet and one layer of approved SBS-modified bitumen cap sheet as indicated on Drawings. h. Provide and install one layer of approved SBS-modified bitumen base flashing sheet and one layer of approved high-performance fabric reinforced thermoplastic membrane in approved flashing adhesive. i. Clean and remove all debris caused by new construction. j. Provide contractor's 2-year warranty and manufacturer's 20-year minimum roof material and labor warranty. k. The roofing manufacturer shall submit an "Intent to Warrant" document and that document shall be included in the bid / quote submission. l. Associated work as indicated on Drawings. 3. Low or abandoned conduit and piping shall be moved or removed by the Owner unless noted otherwise. 4. All other miscellaneous incidental work and coordination not shown that may be required to complete the project.