As of February 3, 2023, the project has been awarded. Litter Pickup and Trash Removal The Contractor shall pick up and remove all trash, paper, glass, debris, tree limbs, and other litter from the areas prior to mowing on each scheduled visit regardless of the amount of mowing required. The Contractor shall be responsible for the proper disposal of all litter. Mowing Requirements A. All areas shall be uniformly cut each mowing cycle to a minimum height of 1", but no higher than 2", unless otherwise directed by the department. Note: In the event the Contractor mows higher than the specified height, the contractor shall mow the area in conflict at the contractor's own expense. B. The Contractor shall ensure a clean cut, and shall remove all heavy grass clippings or other vegetation from the site. All roadways/sidewalks shall be kept free of clippings and debris. C. To prevent projectiles from being thrown into the street, mowers need to have guards on their mowing decks. D. Areas of different widths shall be connected with smooth flowing transitions. Edging A. Edging shall be done only upon request by the owner. If the service is needed, all turf areas shall be edged along the curb line, sidewalks, and roadways immediately after each mowing cycle. Edging shall be done with a metal blade edger. Trimming/Blowing A. The Contractor shall trim all vegetation from around County right-of-way roadside obstacles and their proximities that occur within the designated mowing area in order to present a neat and attractive appearance. Trimming shall be done by string trimmer or by equipment as close as mechanical means will allow. B. All curbs, sidewalks and roadways must be properly blown off to remove trash and cuttings immediately after mowing, edging and trimming. Herbicide/Growth Regulator
.webp)
