Site work for a playground / park / athletic field in Kansas City, Missouri. Completed plans call for site work for a playground / park / athletic field.

The District reserves the right to reject any and all proposals and to waive informalities. Pending PHSD Board approval, work may begin Tuesday, July 5, 2022 and must be completed by August 12, 2022. Anti-Fungal Does not require recycled rubber If using recycled rubber it must be manufactured strictly from a waste stream rubber buffing versus a crumb, chunk, or granulated particle derived from the whole tire recycling process. The loose fill must not carry any unwanted characteristics of whole tire recycling including that of steel content, polyester, or cotton fibers. Colors shall be dyed upon the rubber buffing or pigmented; no paint or colorant coatings shall be accepted. Rubber particles shall range in size from 3/8" to 2". Averts Nesting of Insects Non-Absorbent Non-Toxic Does Not Deteriorate Maintains a Fresh Appearance ASTM Tested and Approved Meets CPSC Guidelines as a Resilient Safety Surface ADA Wheelchair Accessibility Tested Flammability (ASTM D2859): Pass Tensile Strength (ASTM D412): 60 psi (413 kPa) Tear Resistance (ASTM D624): 140% Water Permeability: 0.4 gal/yd2/second Accessibility: Comply with requirements of ASTM F1951 Remove existing rubber tile Add or remove AB-3 rock as necessary to meet depth requirements (Discuss with owner) Install a minimum 6 x 6 inch concrete border around North and West sides at Chinn Elementary Install bonded rubber