Renovation of a transportation facility in Janesville, Wisconsin. Completed plans call for the renovation of a transportation facility.

Rock County reserves the right to accept or reject any or all bids; to waive any technicality or error in any bid or part therein, and to accept the same or combinations, in whole or in part, whichever is deemed to be in the best interest of Rock County. Contracts are awarded to the lowest, most qualified, responsible, and responsive bidder based on the base bid and full consideration of any or all alternatives, as may be in the best interest of Rock County. In determining the award of contract, Rock County will consider the scope of the work involved, time of delivery, competency of bidder, bidders ability to render satisfactory service, and past performance. If two or more bidders submit identical bids, Rock County will make award to bidder of its choice and such decision will be final. All questions concerning this Invitation to Bid shall be submitted in writing to Shilo Titus, Purchasing Manager. Questions shall be received by 12:00 noon (local time), March 2, 2022. Questions received after this date and time will not be answered. Questions shall be e-mailed to shilo.titus@co.rock.wi.us No verbal explanation or instructions will be given regarding the meaning of the drawings or specifications during the bid period. Bidders shall bring inadequacies, omissions, or conflicts to Rock County's attention in writing by the question cut-off date and time. If necessary, answers to questions will be provided to all specification holders in the form of an addendum. Addendum will include a list of each question received and Rock County's response. The building at 4004 S. Oakhill Ave was constructed in separate phases. The project will renovate the older portion of the building to upgrade the exterior wall sheeting, trim, insulation, garage doors, roof, and HVAC system. WALL RENOVATION 1. Remove existing wall sheeting, trim, and insulation on east and south walls. 2. Remove existing wall sheeting, trim, and insulation on west wall to connect with the newer addition and the north wall from the east corner to the airfield electrical vault. 3. Furnish and install new 6" PSK STD wall insulation where previous was removed. 4. Furnish and install new standard color 26GA wall panel and trims on walls where sheeting is removed. Color selected by Airport staff later. 5. Remove existing gutters and downspouts. Replace with new at south wall. C. RE-ROOF 1. Remove and dispose of approximately 8,300 SF of existing screw down roof panel and insulation. 2. Furnish and install approximately 8,300 SF of 6" STD PSK roof insulation, white faced. 3. Furnish and install 26GA galvalume screw down roof panel over approximately 8,300 SF. 4. Furnish and install new standard color rake and eave trim. D. DOORS 1. (1) 14X14' double sided steel insulated white OH door w/two 24"x8" windows, normal headroom track. Remove old and install new. 2. (1) 10X10' OH door same as above. 3. (1) 14X13' OH door same as above. 4. (3) Electric door operating systems, sized for each door, 115V1PH w/photo eyes. 5. Disposal of old doors and openers removed. E. HVAC 1. Remove and dispose of (2) existing ceiling mounted heaters. 2. Furnish and install (2) high-efficient natural gas fired unit heaters, BTU capacity sized for shop space. 3. Furnish and install new vent piping through the roof or side wall. 4. Furnish and install thermostats and wiring as needed.