Renovation of an educational facility in Laredo, Texas. Completed plans call for the renovation of a educational facility.

The purpose and intent of this Request for Proposal is to solicit proposals for Laredo College Fort McIntosh Campus P-24 Building Renovation Project. The awarded Contractor must inspect and assess the conditions of the Building, and recommend the appropriate solution for the repairs. All information contained in this RFCSP is believed to be substantially correct. However, the responsibility for determining the full extent of the services required, and verification of all information herein shall rest solely with those making proposals. Neither the College nor its representatives shall be responsible for any error or omission in this RFCSP. For additional information or questions, contact Ms. Maria I Royster, at (956) 721-5126 or email maria.royster@laredo.edu The District reserves the right to reject any or all proposals, or any part thereof, and to waive any technicalities or informalities. This Request for Proposals does not obligate the District to award a contract for any of the projects or to reimburse any cost associated with the preparation of any proposal. Provide Parking Lot Enclosure: o Arm Barrier Opener: o Provide one (1) Door King 3-piece 27' aluminum arm barrier. o Provide Door King dual channel loopdetector. o Provide goose neck for key pad, o Provide Entry card reader. o Provide 150 each key tags. o Electrical: o Provide boring under existing street from sidewalk to sidewalk from building P-24. (Approximately 47 Linear Feet) o Provide one (1) 20A-120V-single phase branchcircuit for automatic gate opener from electrical panel on Building P-24. o Furnish and install 1" underground PVCconduit. o Furnish and install wiring for power Add One (1) Half Bathroom 6' Wide x 8' Long (per as sketched on drawing of floor plan): o Provide wood stud framing. o Provide fiberglass batt insulation. o Provide 5/8" thick gypsum boards walls. o Provide 5/8" thick gypsum board ceiling. o Provide one (1) 3070 solid core door with wood Frame and privacy lockset. o Provide 1" x 12" wood base at exterior wallsto o Match existing. o Provide ceramic tile flooring. o Provide ceramic tile wainscot at all walls to 5'- 0" AFF. o Provide ceramic tile base. o Provide interior paint including all inside walls. o Provide interior paint on all building walls. o Provide toilet accessories asrequired. o Provide plumbing rough-in, and fixture installation. o Provide exhaust fan and HVACsupply. o Provide electrical rough-in and fixture installation. Add One (1) MDF Room at Basement 9'Wide x 9' Long (per as sketch on drawing of floor plan): o Provide wood stud framing. o Provide fiberglass batt insulation. o Provide 5/8" thick gypsum board walls. o Provide 5/8' thick gypsum boardceiling. o Provide one (1) 3070 solid core door with wood frame and key lock lockset. o Provide 1" x 12" wood base to match existing. o Provide tape, float, texture and paint. o Provide epoxy paint at floor. o Provide one (1) 12,000 BTU Mini Split HVAC unit for MDF Room. o Provide one (1) 22,000 BTU Mini Split HVAC unit for basement. o Provide electrical rough-in and fixture installation.