Renovation of a mixed-use development in Largo, Florida. Completed plans call for the renovation of a educational facility.

Provide all labor, materials and performing all work necessary for the completion of removing existing pneumatic control actuator and replace with new direct digital control (DDC) actuator. The new actuator will be integrated to the existing controls interface. Provide new cabling for new actuator and maintain the same sequence of operation. The existing pneumatic actuator system shall remain operational until all dampers have been retrofitted. All work plans and specifications were prepared by SGM ENGINEERING. The prime Contractor shall be a Florida licensed Mechanical Contractor. Note: The Largo Administration Building is now a secured building effective December 1, 2015 and visitor procedures have changed. Inform the officer at the front desk that you have a bid to be delivered to the Purchasing Department. The officer will call Purchasing and someone from the department will come to the front desk to date and time stamp your bid and provide a receipt. This process may take several minutes, so please allow sufficient time when hand delivering a bid submittal. We apologize for any inconvenience this may cause you, but it is imperative that all information be disseminated in a public forum with all potential Bidders present to minimize confusion or misunderstandings. Additions or changes to the original bid documents resulting from this conference of a material nature, will be documented in the form of written addenda and distributed to all attendees. Please note that if you are late to this mandatory pre-bid conference you will not be eligible to sign the attendance roster and therefore may not submit a bid. You may still, however, attend the conference if you wish.