Naics 333914 Matl Code 5599676 Pump, Sump, Submersible, Automatic, Stainless Steel, Single Phase, 115v, 1/2- Hp, 9-gallons Per Minute. At 40-feet Total Head and 73-gallons Per Minute. At 10-feet Total Head. All the Major Parts Including Casing, Impeller, Motor Frame and Fasteners Shall Be 304 Stainless Steel; Motor Shaft Shall Be 303 Stainless Steel With Discharge Size 1-1/2 Inch National Pipe Thread. Pump Shall Have Oil Lubricated Double Mechanical Seal, Nitrile Butadiene Rubber Fitted Carbon/ceramic for Upper Seal and Vitton Fitted Silicon Carbide/silicon Carbide for Lower Seal. Motor Shall Be of Split Capacitor Design and Air Filled With Class F Insulation. This Item Shall Pump Dirty or Semi-dirty Waters Containing 3/8- Inch Spherical Solids and Shall Be Provided With a 20-foot Long Water Resistant #16 Awg Cord and Mechanical, Non Mercury Float Switch, Ul/csa Approved. All questions and inquiries regarding this solicitation shall be sent via electronic mail to the Buyer, Rashawn McDade. The e-mail subject line must include the IFB number and name of the Buyer as follows: "IFB No. 127019 - Rashawn McDade". All questions are due no later than 2:00 p.m. on 03/10/2022. Responses to questions and inquiries will be posted Vendors already registered on LADWP's Ivalua electronic bid submittal portal can log into their account and navigate directly to the bid/solicitation. Vendors that are not currently registered will need to complete the free registration. Registration instructions and a Vendor User Guide that includes instruction on how to submit an electronic bid can be found on the Ivalua website. Late bids and bids submitted via electronic mail (email), facsimile, or hardcopy will not be accepted.
.webp)
