Demolition, site work, asbestos abatement and new construction of an educational facility in Fishersville, Virginia. Completed plans call for the demolition of a 22,500-square-foot educational facility; for asbestos abatement for a 22,500-square-foot educational facility; for the construction of a 55,000-square-foot educational facility; and for site work for a educational facility.

SCOPE OF SERVICES: The Agency's documents indicated in Section IV above describe the program, siting, appearance, aesthetics, functional arrangement, and level of quality desired by the Agency. The selected A/E shall furnish all expertise, labor and resources for complete design and construction period services for the project in accordance with the requirements of the A/E Manual. The following generally highlights the services that the A/E will be required to perform: A. Refine, clarify, and define the Agency's project description, data, and requirements as necessary to develop a Schematic design of the project which meets the Agency's requirements and is within the stipulated "design-not-to-exceed" construction budget. Respond to all DEB and other agency review comments and resolve outstanding design issues at the various phases by taking appropriate action in the design of the project. B. Develop a Preliminary Design submission consistent with the requirements of the A/E Manual. Respond to all DEB and other agency review comments and resolve outstanding design issues prior to submission of construction documents. C. Provide complete construction contract documents with professional seals and signatures in accord with the procedures of the A/E Manual. Documents must be complete and ready for bidding not later than 8-1-2024. D. Assure that the construction contract documents are in conformance with generally accepted architectural and engineering practices and comply fully with all applicable codes and regulations including, but not limited to, the Virginia Uniform Statewide Building Code, and the accessibility standards referenced in the CPSM. E. Provide specifications which reflect current requirements, standards and product availability. F. Where applicable, develop and prepare construction documents for an Erosion and Sediment Control Plan and a Stormwater Management Plan. Obtain approvals from required Agencies. G. Where applicable, coordinate entrance design with and obtain approval from the Virginia Department of Transportation office having jurisdiction. H. Coordinate the design of utility connections with local utility provider and obtain necessary approvals. Agency will pay filing fees and connections charges, as required. I. Prepare A/E cost estimates for the project per the A/E Manual. J. Represent the Agency by presenting necessary oral and/or graphic presentations to State Agencies such as the Art and Architectural Review Board, the Division of Engineering and Buildings or any other group having interest in the project. K. Complete all forms and documents in formats required by the A/E Manual and process in accord with the Agency's instructions. L. Provide services to assist the Agency in the bidding and award of the construction contract. [Modify as necessary to reflect any change from the A/E services described in the Manual.] M. Provide services for the construction phase, as required by the A/E Manual, for the administration of the contract. All inquiries for information should be directed to: Mark Snodgrass, VCCO Phone #: (540) 332 -8924