Site work and paving for a road / highway in Fairfield, Ohio. Completed plans call for site work for a road / highway; and for paving for a road / highway.

This notice will be posted on the District's web site for 2 weeks from date of posting. Said work will consist of: 2022 Paving Improvements at various Fairfield City School District facilities. Questions regarding the scope of work may be directed to Jamie Bertke, Supervisor of Building and Grounds, bertke_j@fairfieldcityschools.com. Bids shall be submitted on the form furnished with each set of bid documents or on a typewritten copy of that form. Each bid shall be accompanied by a Bid Guarantee meeting requirements of Section 153.54 of the Ohio Revised Code. Said guarantee may be in the form of a bond (ORC 153.571) or a certified check, cashiers check, or letter of credit meeting requirements of 153.54. The Board of Education reserves the right to waive irregularities in bids, to accept or reject all or any bids, to accept or reject all or any parts of bids, and to conduct such investigation as necessary to determine bidder responsibility. No bids may be withdrawn for at least sixty (60) days after the scheduled closing time for receipt of bids. Striping: Stripe entire lot as per existing layout unless specified otherwise by Owner. Standard Duty Asphalt Pavement Excavate proposed area to a maximum depth of 12". All spoils removed off site. Compact existing sub grade with a smooth drum roller. Install 8" ODOT 304 aggregate base Install 2" ODOT 301 asphalt base. Install 2" ODOT 448 asphalt surface 2" Overlay and Grind (SY): 2" Overlay as field marked. Grinding as needed for transitions and drainage. Clean proposed area and apply an ODOT 407 Tack coat, applied by a truck mounted asphalt distributor. Install 2" ODOT Asphalt Surface. Standard construction practices will be followed. 2" Grind and Pave (SY): Remove the top 2" existing asphalt pavement as field marked. Clean proposed area and apply an ODOT 407 Tack coat, applied by a truck mounted asphalt distributor. Install 2" ODOT Asphalt Surface. Standard construction practices will be followed. 4" Grind and Pave (SY): Remove the top 4" existing asphalt pavement as field marked. Clean proposed area and apply an ODOT 407 Tack coat, applied by a truck mounted asphalt distributor. Install 2.5" compacted thickness ODOT Asphalt Base followed by 1.5" ODOT Asphalt Surface. Standard construction practices will be followed. 6" Grind and Pave (SY): Remove the top 6" existing asphalt pavement as field marked. Clean proposed area and apply an ODOT 407 Tack coat, applied by a truck mounted asphalt distributor. Install 4" compacted thickness ODOT Asphalt Base followed by 2" ODOT Asphalt Surface. Standard construction practices will be followed. Concrete Repair (SF): Repair and replace concrete as specified in bid proposal form. Crack Sealing (LF): Placement of asphalt emulsion into non-working cleaned pavement cracks. Clean and fill cracks with standard crack Sealant.