Renovation of a residential development in Lenox, Massachusetts. Completed plans call for the renovation of a residential development.

Installation of new ADA bathroom with minor electrical, mechanical, and sprinkler work. Required for DCAMM contracts over $150,000, Highway Division contracts over $50,000. The Contractor shall perform all Work required by the Contract Documents for ADA Bathroom prepared by the Bradley Architects Inc acting as and referred to in the Contract Documents as the "Prime Designer. A. This section lists the procedures required for the proper completion of this project including processing the Release of Retainage and making the Final Payment to the Contractor. B. Consult the Individual sections of the specifications for requirements affecting Project Close-Out. A. Framing of new non-bearing walls for ADA Bathroom The Scope of Work consists of, but is not limited to, the installation of all materials to be furnished under . The work to be done under this section is generally shown on the Drawings. Examine all drawings and all other sections of the Specifications for requirements which affect work under this section, whether or not such work is specifically mentioned in this Section. 1. The plumber shall cut, cap, and make safe all plumbing items identified in the scope of work and shall drop all plumbing debris to the floor for removal by the PC. 2. Disconnect supply and waste piping from existing building lines to prepare for new bathroom. 3. Adjust or rework existing baseboard heat if required. 4. Provide and install new sink and faucet, fittings, and related accessories. 5. Install new toilet, fittings, and seat.