This is a service / maintenance or supply contract in Pittsburgh, Pennsylvania. Contact the soliciting agency for additional information.

The ACAA will typically utilize a Construction Manager (CM) on each of the projects listed below at Pittsburgh International Airport (PIT) and Allegheny County Airport (AGC) which involves construction. Specific responsibilities will include but are not limited to: Field inspection to ensure compliance with bid documents, perform constructability and technical reviews of design documents, maintaining a CPM Schedule to coordinate multiple prime contractors, recommend contractor progress payments, monitoring and reporting of contractor DBE participation, develop/prepare construction safety phasing plans to minimize operational outages, negotiate and recommend minimal change orders for contractor scope changes or value engineering, complete market availability and labor analysis, construction cost estimating and reconciliation, provide final as-built drawings, and maintain all records as required by the FAA, PennDOT, PADEP, Findlay and Moon Townships, the ACAA or other entities as required. Work will include miscellaneous repairs and replacement of cracked and deteriorated pavement on roads, shoulders, sidewalks, curbs, parking lots, runways, taxiways, aprons, and ramps. Work may consist of partial or full keel section replacement, isolated concrete slab work, joint and crack repair, trench drain repair, asphalt shoulder work, lighting upgrades, signage improvements, and pavement marking. Typical projects may include: a. Airfield signage and sign bases b. Airside apron and trench drains c. Runways, aprons, and taxiways d. Joint sealant and spall repair e. Airfield lighting upgrades/replacements Work may consist of permitting, surveying, geotechnical investigations, site grading, drainage, roadways, aprons, taxiways, sanitary and storm sewers, potable and fire protection water, electrical, HVAC, telephone, and gas lines. Work may consist of miscellaneous mechanical, electrical or structural repairs, roof replacement, brick work, caulking, sealing, painting, baggage system upgrades and security upgrades on the Landside and Airside Buildings, and other miscellaneous buildings as required. Questions should be directed to Mr. Jeff Bezek, P.E. at 412-472-3852 or email to jbezek@flypittsburgh.com Final consultant selections (following short-listing, proposal evaluation, and interviews) will be based on, but not limited to, the following criteria: Staff qualifications, experience and local office bench strength; demonstrated interest in the projects; organization, clarity, cohesiveness, quality and completeness of both the written proposal and oral presentation; sensitivity to ACAA requirements and project constraints; indicated ability to manage projects, produce required results, meeting project schedule and controlling costs; demonstrated knowledge of FAA, PennDOT, local, and ACAA applicable standards and requirements; capital cost estimating expertise, constructability reviews, value engineering, construction procedures and scheduling methods; monitoring DBE goals, impacts to airport operations and other areas of construction management.