Renovation of a power facility in Libby, Montana. Completed plans call for the renovation of a power facility.

REPRESENTATIONS AND CERTIFICATIONS CONTAINED HEREIN MUST BE COMPLETED BY VENDORS AND RETURNED WITH QUOTES: IF YOUR REPRESENTATIONS AND CERTIFICATIONS ARE REGISTERED IN THE "SYSTEM FOR AWARD MANAGEMENT" (SAM) CHECK HERE . IF NOT, YOU CAN REGISTER ONLINE AT www.sam.gov 2. Marking of Email Quotation Submittal: Email Quotation submission shall be plainly marked as follows: Quote for: Libby Dam Powerhouse Doors, Libby, MT Request for Quote No.: W912DW22Q0015 Closing Date and Time: 14 April 2022, 10:00 am. PST AMENDMENTS NUMBERED________HAVE BEEN RECEIVED 3. Email quotations only. Faxed quotes will NOT be accepted. Email quotes shall be accepted before closing at e-mail address Geraldine.L.Kemp@usace.army.mil. 4. The contractor receiving an award is required to be registered in the SAM (System for Awards Management) 5. PROSPECTIVE CONTRACTORS: Contractors are required to be registered in the System for Awards Management (SAM) for awards resulting from solicitations. This rule more efficiently implements the Debt Collection Improvement Act of 1996, as it requires contractors to be registered in SAM for consideration of future solicitations, awards, and payment. Registration is required prior to award of any contract, basic agreement, basic ordering agreement, or blanket purchase agreement from a solicitation. THIS PROCUREMENT ACTION IS 100% SET ASIDE FOR SMALL BUSINESSES. LACK OF REGISTRATION IN THE SAM DATABASE WILL MAKE A QUOTE INELIGIBLE FOR AWARD. The web site may be accessed at www.sam.gov 6. Award shall be made to the responsive and responsible vendor with the lowest priced quote General: This is a firm fixed price contract. This project involves the replacement of ten doors within the Libby Dam powerhouse structure. Work includes replacing existing doors and modification of some door swings to clear the path of the crane. Replace with doors of same size as existing doors (sizes listed below). The Contractor is responsible for verification of all field measurements, dimensions, and quantities. Work to be at U.S. Army Corps of Engineers Seattle District (USACE-NWS) Libby Dam Project, 17877 HWY 37, Libby MT 59923-7828. 1.1 Description: The contractor shall possess all necessary licenses and/or permits required to perform this work and provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other non-personal services necessary for door replacement as defined in this Performance Work Statement. The contractor shall perform to the standards of this contract. 1.2 Period of Performance: The contractor will complete all phases of work within 120 days after award of contract. 1.3 Contractor Work Hours: Work hours on the government facility will be restricted to 6:30 a.m. to 5:00 p.m. daily, Monday through Thursday. No work shall be performed on Federal Holidays, the Friday after Thanksgiving, and from December 25 to January 1st, unless prior approval is obtained. The Contractor shall not access the government facility prior to 6:30 a.m. and shall be off site no later than 5:00 p.m. Requests for alternate work schedules may be considered. 1.4 Recognized Holidays: New Year's Day Labor Day Martin Luther King Jr.'s Birthday Columbus Day President's Day Veteran's Day Memorial Day Thanksgiving Juneteenth Christmas Day Independence Day 1.5 Place of Performance: The work to be performed under this contract will be performed at Libby Dam Project, Powerhouse 17877 MT Highway 37, Libby MT 59923. 2 Doors to be replaced: 2.1 CLIN 0001- Replace existing 3-0 x 6-8 door and frame with new Door and frame on the West Entrance to the Powerhouse. Replace existing exterior man door on West Entrance with new steel security door with 90 min. fire rating and new frame and security lite, door to swing outward. 2.2 CLIN 0002- Replace existing 3-0 x 7-0 door and frame with new Door and frame to Computer Lab. Replace existing interior man door and frame on South Entrance to Computer lab with new 90 min. fire rated door and new frame with lite, door to swing inward. W912DW22Q0015 Page 7 of 19 2.3 CLIN 0003- Replace existing 4-0 x 7-0 door and frame with new Door and frame to The Server Room. Replace existing interior man door and frame on South Entrance to the Server Room with new 90 min. fire rated door and new frame with lite, door to swing inward. 2.4 CLIN 0004- Replace existing 5-0 x 6-8 double door and frame with new Door and frame to The Control Room (West Side). Replace existing interior double man door on West Entrance to the Control Room with new 90 min. fire rated door and new frame, door to swing outward. 2.5 CLIN 0005- Replace existing 3-0 x 7-0 door and frame with new Door and frame to The Control Room Annex. Replace existing interior man door and frame on South Entrance to Control Room Annex Space (East side) with new 90 min. fire rated door and frame with lite, door to swing inward. 2.6 CLIN 0006- Replace existing 3-0 x 7-0 door and frame with new Door and frame to Control Room (East Entrance). Replace existing interior man door and frame on East Entrance to the Control Room with new 90 min. fire rated door and new frame with lite, door to swing outward. 2.7 CLIN 0007- Replace existing 3-0 x 7-0 door with new Door to office #1. Replace existing interior man door on South Entrance to office #1 with new 45 min. fire rated door with lite. 2.8 CLIN 0008- Replace existing 3-0 x 7-0 door with new Door to office #2. Replace existing interior man door on South Entrance to office #2 with new 45 min. fire rated door with lite. 2.9 CLIN 0009- Replace existing 3-0 x 7-0 door with new Door to office #3. Replace existing interior man door on South Entrance to office #3 with new 45 min. fire rated door with lite. 2.10 CLIN 0010- Replace existing 3-0 x 7-0 door with new Door to Tool Room. Replace existing interior man door on South Entrance to Tool Room with new 45 min. fire rated door. Note: A site visit is recommended. Contractor is responsible for verifying all information provided by the Government on these doors for accuracy. See drawing for door locations. Utility Outages: Contractor shall coordinate utility outages at least 7 days in advance if required. Outages shall be kept to a minimum and any one outage shall not last more than 4 hours. he contractor shall possess all necessary licenses and/or permits required to perform this work and provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other non-personal services necessary for door replacement as defined in this Performance Work Statement. The contractor shall perform to the standards of this contract.