Site work for a bridge / tunnel in Medina, Ohio. Completed plans call for site work for a bridge / tunnel.

The project consists of the removal of an existing corrugated sectional plate arch culvert and the installation of a new pre-cast conc rete four-sided box culvert and wing walls at the throat of the cul-de-sac on Gates Mill s Blvd. Questions:Fred Himmelreich, P. E., Assistant City Engineer,Phone #: (330) 723-3846 Email: fredh@medinaoh.org General o Base Bid This project consists of the removal of the existing corrugated sectional plate arch culvert on Gates Mills Boulevard and the installation of a new four-sided pre-cast box' culvert. Please note, on site physical construction will be permitted to begin on or after August 1, 2022. Below please find a general summary of items that are included as a part of the Base Bid for this project: 1. Maintenance of traffic during construction; one lane of traffic over culvert maintained throughout the project via temporary pavement installation. . . 2. Part width removal of the existing corrugated sectional plate arch culvert, concrete floor, headwalls and railing. 3. Installation of temporary shoring to complete culvert replacement part width. 4. Installation of a pre-cast reinforced 4-sided box culvert with type2 waterproofing. 5. The removal and replacement of the existing reinforced concrete pavement within the culvert replacement area including integral curbs. 6. Removal and replacement of existing concrete driveways and drive aprons. 7. Removal and replacement of existing concrete walk. 8. Installation of new reinforced concrete headwalls, wing walls and decorative railings. 9. Installation of new storm sewer. 10. Installation of new sanitary sewer within culvert limits. 11. Installation of new water main and casing pipe within culvert limits. 12. Installation of new pavement curb drain. 13. Installation of rock channel protection, type B. 14. Final grading, topsoil placement, and seeding of all areas within the construction limits