Renovation of a fitness / recreation center in New Orleans, Louisiana. Completed plans call for the renovation of a fitness / recreation center.

This event is replacing event 2081 The Contractor shall provide all labor, materials, tools, equipment, facilities, supervision, management, financing, services, shop drawings, submittals, testing, and other items necessary for the proper execution and functioning and shall make all installations and connections necessary, specified, customary, or otherwise appropriate to perform fully and to complete in every respect the contract work generally described as follows: (Specification or drawing references included in the following statement of Subcontract work are applicable but not necessarily all inclusive Sanchez Rec Center - 1616 Fats Domino: Mechanical Repair - RTU-1 Provide Labor, Equipment and Materials. RTU-1 o Upon arrival, discovered main disconnect in off position. Energized unit to run further checks. o Tested all motors for earth ground. None detected. o Meg tested Compressors 1 and 2. Compressor 2 found lo have open windings. o Further testing of Compressor 2 found contactor to be overheated and welded closed. This is suspected lo be what caused Compressor 2 to phase out and short/open the windings. o All other components tested without fault. Compressor #2 to be replaced. This Includes recovery of existing refrigerant, flushing open circuit, replacement of compressor, evacuation and re charging of circuit. Remove all construction debris and dispose off-site. Repair any damage caused to site during work performed. All materials, equipment, supplies, fasteners, and other items required to perform work tasks to be supplied and installed by contractor. All trash and debris to be removed by contractor and hauled off. Do not use City dumpster. Clean area when work Is complete. Area to be ready for business use when finished. If any equipment is found to be defective ii is to be identified to owner for approval of repair/replacement. All material shall conform to the latest issue of all applicable standards established by NEMA. and underwriters laboratories, inc. and shall bear manufacturer' s trade and brand name. All work shall be installed and completed with the latest rules and regulations of the ASME, NFPA,NEC and all State and local codes and standards and such work not so installed shall be removed and reinstalled at the Contractor' s expense. Warranties on all furnished equipment and industry standards on parts and labor, all manufacturers warranties should apply. Personal Protective Equipment to be worn at all times and a safe working environment is to be maintained.