Renovation of a municipal facility in Menomonee Falls, Wisconsin. Completed plans call for the renovation of a municipal facility.

13145 LF - 2x1.25" HDPE Conduit Directional Bore 3596 LF - 1x1.25" HDPE Conduit Directional Bore 15045 LF - 288 - Count Dielectric FO Cable 5658 LF - 48 - Count Dielectric FO Cable 1 16741 LF - 2AWG Solid Copper Tracer Wire 25 EA - Concrete Polymer Vault Pre-Qualification: Yes Bidder's Proof of Responsibility for 2022 is required on all bids in excess of TEN THOUSAND DOLLARS ($10,000.00). Proof of Responsibility forms are available from the ENGINEERING AND DEVELOPMENT DEPARTMENT located on the 1st floor of the Menomonee Falls Village Hall, W156N8480 Pilgrim Road, Menomonee Falls, Wisconsin 53051 Each proposal must be accompanied by a certified cashier's check or bid bond made payable to the Village of Menomonee Falls, or cash, in an amount not less than five percent (5%) of the maximum bid price as a guarantee that if the bid is accepted, the bidder will execute and file the proposed contract within five (5) days after the award of the contract. In case the successful bidder fails to execute such contract and provide the required bonds and insurance certificate within the time specified the amount of the check or bid bond shall be forfeited to the Village as liquidated damages. No bid shall be withdrawn for a period of sixty (60) days after the scheduled time of bid closing. Bids and proposals must be sealed and addressed to the Village Board of Menomonee Falls, Wisconsin. There shall appear on the envelope of each bid and proposal, the name and address of the bidder and the purpose for which the proposal is intended. No proposal will be considered which is not made out on the regular forms furnished by the Village. The Village of Menomonee Falls reserves the right to reject any or all proposals, to waive any defects or informalities in proposals received and to accept the proposal most advantageous to the Village. The letting of the contract shall be subject to the provisions of Section 66.0901 of the Wisconsin State Statutes. The Plans and Specifications for this project were prepared by Livermore Technologies. Estimated Range $350,000 - $490,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.