Site work and paving for a transportation facility in Chatom, Alabama. Completed plans call for site work for a transportation facility; and for paving for a transportation facility.

Bids will be received for work associated with the furnishing of all supervision, technical personnel, labor, materials, machinery, tools, equipment, incidentals, and services, including utility and transportation services, and the performance and completion of all work required for the maintenance / rehabilitation of the existing runway, taxiway, and apron (approx. 43,250 sy). Work will consist of the following: (1) removal of rubber and existing pavement markings; (2) crack sealing existing runway, taxiway, and apron; (3) sealcoating existing runway, taxiway, and apron; (4) the temporary remarking of the existing runway, taxiway, and apron; (5) the permanent remarking of the existing runway, taxiway, and apron. Other incidental items of work necessary for the successful completion of the project may also be required. Additional bid requirements are more specifically defined in Section B of the technical specifications for the project. All work shall be performed in strict accordance with the plans and technical specifications prepared for this project. It is anticipated funds for the project will be available from ALDOT within 60 days or sooner of bid opening. Once funds are received, the compilation of the contract documents can take place. Once the contract between the Airport Board and contractor is executed and a preconstruction conference is held, work on the project can commence. Please refer to Section B for bidding and post-bid requirements necessary to award of the project. Award will be made to the lowest responsible qualified Bidder in accordance with Contract documents, if awarded. The project being offered at this time is not a federally funded project, but specific requirements are still required of the Contractor during the bidding and construction phases of the project. Each Bidder must furnish as part of his bid, a Bid Bond payable to the Owner in an amount equal to five (5) percent of the TOTAL AMOUNT BID. All requirements are clearly defined in the technical specifications. It shall be the responsibility of the prospective bidder to become familiar with all of the requirements of bidding and construction prior to submitting a proposal on the project listed above. No additional questions will be accepted after 1:00 p.m. on Thursday, May 12, 2022. Contractors must be qualified under Alabama Law to perform the construction activities desired by the Owner and must be registered with the State of Alabama's Licensing Board for General Contractors to perform the work specifically addressed in this project. Contractors must have the "Heavy / Railroad" (H/RR) or "Heavy / Railroad Specialty" (H/RR-S) classification. It should be noted that contractors must have this classification added to their license prior to bid opening or are at risk of having their bid rejected. The successful Bidder, whether a resident or nonresident of the State of Alabama, shall be required to comply with all other applicable City, County and State licensing and/or permit laws. The Bidder shall guarantee to hold his bid good and may not withdraw his bid for a period of sixty (60) calendar days after the scheduled closing time for receiving bids. Any proposal received which does not comply with these provisions, or more specific provisions outlined in the technical specifications, will be returned unopened. The Owner reserves the right to reject any and all bids, to waive any informalities or irregularities in the Bids received, and to accept a Bid which is deemed most favorable to the Owner at the time the conditions are stipulated. Work will consist of the following: (1) removal of rubber and existing pavement markings; (2) crack sealing existing runway, taxiway, and apron; (3) sealcoating existing runway, taxiway, and apron; (4) the temporary remarking of the existing runway, taxiway, and apron; (5) the permanent remarking of the existing runway, taxiway, and apron. Other incidental items of work necessary for the successful completion of the project may also be required.