Renovation of a transportation facility in El Paso, Texas. Completed plans call for the renovation of a transportation facility.

Works to be provided for this project shall be for furnishing all labor, materials, transportation, and services for the construction and installation as follows: 1. Provision and installation of approximately 1,850 linear feet (lf) of new 24" ductile iron well collector pipeline and approximately 8,000 lf of new 30" ductile iron well collector pipeline. These segments of the project are referred to as "Corridor e" and will replace the existing well collector pipeline within these replacement limits. The exception is under the existing 8l-26r airport runway which was recently installed in 2014. The corridor e pipeline will tie-in to this newly installed pipeline on both ends of the runway. The proposed well collector pipeline routing will be offset from the existing well collector pipeline and the existing well collector pipeline will be abandoned in place. 2. Provision and installation of approximately 3,300 linear feet (lf) of new 36" ductile iron well collector pipeline. This segment of the project is referred to as "Corridor d" and will replace the existing well collector pipeline within these replacement limits. The exception is under the existing 8l-26r airport runway which was recently installed in 2014. The corridor d pipeline will tie-in to this newly installed pipeline on both ends of the runway. The proposed well collector pipeline routing will be offset from the existing well collector pipeline and the existing well collector pipeline will be abandoned in place. 3. The project includes installation of new intertie pipelines between existing pipelines and corridor e and corridor d in such a way that will simplify the valving configuration near the southernmost epia access road. The revised piping will allow epwater to easily deliver water from the various airport wells to either the existing mcrae reservoir or montana reservoir with valve manipulation. 4. Also included in the project is installation of three portions of the pipelines by means of trenchless methods with installation of the pipeline within fiberglass casings. The project description, as shown above, is only a general overview of this project. The contractor shall refer to the project plans and specifications for further information.