Site work for a municipal facility in Salt Lake City, Utah. Working plans call for site work for a municipal facility.

This Request for Quotes "RFQ" is issued in accordance with State of Utah Procurement Code and the Utah Administrative Code. If any provision of this RFQ conflicts with the Utah Procurement Code or the Utah Administrative Code, then Utah Procurement Code and then Utah Administrative Code will take precedence. Purpose of this Solicitation: The purpose of this RFQ is to enter into a purchase order with the responsive and responsible vendor that submits the lowest cost to provide: and install chain link fence at Lee Kay Public Shooting Range.. Closing date and time As of July 5, 2022, bids were canceled. No definite date for the rebid. The closing date and time for this sourcing event is as provided in this posting. If your time is different from that shown, your profile may be set to a different time zone. Please see the attachment titled "Changing Your Time Zone" in the Buyer Attachments section for directions on how to update your profile. It is your responsibility to make sure you submit your response by the date and time indicated above. Specifications: Lee Kay Public Shooting Range needs various areas of chain link fence installed (roughly 650 +/- linear feet dependent upon bids and budget constraints. Scope of work to include materials and installation of 6', 9ga fabric, bottom knuckled, 2-1/2" end/corner posts, 1-7/8" line posts, 1-5/8" Top rail, and bottom tension wire. Fencing will be in several locations around the facility. Fencing will include replacing one set of gates. Gates, posts, hardware and installation of gates provided by contractor. Project MUST BE COMPLETED by or before June 30, 2022. Solicitation Number: The solicitation number for this RFQ is Solicitation #JH22-145. This solicitation number must be referred to on all quotes, correspondence, and documentation submitted to the State relating to this RFQ. Evaluation of Quotes: Each quote received shall be evaluated for responsiveness in as outlined in the Utah Procurement Code. This RFQ shall be evaluated by the objective criteria described in this RFQ. Quotes submitted must comply with the specification identified in this RFQ. Any quote that does not comply with the prerequisite and questions sections will be deemed non-responsive and will be rejected. Multiple or alternate quotes will not be accepted. If a vendor submits multiple or alternate quotes, the State will only accept the bidder's primary bid and will not accept any other bids constituting multiple or alternate bids. Any exceptions to the content of this RFQ, including the specifications, must be protested in writing to the Division of Purchasing prior to the closing date. Vendors must review each section of this RFQ carefully before submitting a quote. The Division of Purchasing may solicit other quotes via email, phone, or other methods as permitted by the Utah Procurement Code or applicable Administrative Rules. Vendors are prohibited from communications regarding this RFQ with the conducting procurement unit staff, evaluation committee members, or other associated individuals EXCEPT the State of Utah Division of Purchasing procurement officer overseeing this RFQ. Wherever in this RFQ an item is defined by using a trade name, brand name, or a manufacturer and/or model number, it is intended that the words, "or equivalent" apply; and invites the submission of equivalent products by the Bidders. Question Submission Close Date 5/31/2022 2:00 PM MDT