Remodeling of a military facility in Conroe, Texas. Completed plans call for the remodel of a military facility.

For Conroe Municipal Center Office Remodel - Engineering and Inspections Offices SCOPE OF WORK: Remodel of Existing Engineering and Inspection Office spaces Room 190 Frame, drywall, tape & float 14 linear ft of metal stud wall to 9' ceiling grid Texture and match paint of existing walls Install drywall, paint and texture to include electrical drops below window where millwork was removed. Room 191 Repair drywall to include texture & paint Install 30/70 mahogany door with window & bronze frame to enclose office with matching hardware. Room 204 Install metal stud dividing wall in existing office Frame, drywall, texture & paint to match existing Install new 60/70 mahogany door & bronze frame to create storage area with matching of current hardware. Room 162 Frame, drywall, tape & float dividing wall to ceiling grid Texture & match paint of existing walls Install 5'x5' storefront window and bronze frame in exterior hallway wall Relocate HVAC according to the needs of the new space. Re-work electrical lighting & switching Room 173 Add additional lighting and AC Duct work to accommodate 3 office spaces. Frame, drywall, tape & float 2 new dividing walls. Provide and install a new suspended grid ceiling in 2 offices. Ceiling tiles will be provided. Float, texture & paint concrete walls to match existing building Install (2) new 5'x5' bronze welded frame windows in existing hallway cylinder block wall Install (2) 30/70 mahogany doors & bronze welded jambs in existing hallway cylinder block wall. Doors to match current doors in building/current hardware Install electrical plugs/switches Install or repair necessary flooring for new spaces. Flooring materials provided by the City. All walls will be constructed of 18-gauge metal studs and 5/8" drywall Electrical work will be performed under the National Electric Code using MC cable. All HVAC modifications will be performed under the International Mechanical Code. Permits required for all work. Permit fees will be waived. All work to be performed during normal business hours unless noise interferes with business work activities. (Cinder block work will begin at 5:30 on a weekday) Contractor will place a construction dumpster in back parking lot in a designated location. Work area will be cleaned up daily of visible trash. Work areas will be isolated to avoid any excessive dust including vents and returns for employee safety.