Renovation of a municipal facility in Hopkinsville, Kentucky. Completed plans call for the renovation of a municipal facility.

Account No. 470-CA8C-HK64-00 This scope is to include the following items and necessary associated work: 1. Pressure wash all exposed exterior concrete flat vertical and horizontal surfaces. The intent is to loosen any concrete popouts and prepare for surface repairs. 2. Expose and repair rusted reinforcement. This is generally on the undersides of flat concrete surfaces. This will involve removing the concrete all around the exposed bars and beyond them to sound rebar, cleaning off the rusted reinforcement, lap splicing new reinforcement to the old, and repairing the concrete with an epoxy or polymer modified mortar suitable for vertical and overhead applications. 3. Remove the grout cover over the exterior fin attachments. Clean off any rust and repair any rusted welds. After reconditioning the welds, re-grout the pockets to a flush condition. 4. Cut a new drip notch in the underside of exterior flat concrete surfaces that are over 1' wide where a notch in not already present. 5. Clean out and re-caulk all existing caulked joints at fins, windows, entrance frames, and miscellaneous openings where in contact with exposed exterior concrete. 6. Apply crystalline waterproofing to exposed exterior concrete surfaces. 7. Repair the settled concrete slab in the first floor men's restroom. This will involve removing the slab and cracked cmu walls, placing new subgrade and slab, and rebuilding the cmu walls. Repair or replace the plumbing fixture supports in this area and re-install the existing plumbing fixtures. 8. The cmu wall and slab will have exposed concrete finishes to allow future tile installation. 9. The add alternate for stain will require the application of a uniform color stained finish to all exterior exposed concrete to be selected from a manufacturer's palette of standard colors.