Site work and paving for a road / highway in Brimley, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

This work consists of corrections requested by the Engineer to areas outside the limits of ride quality (such as existing pavement) or to excluded areas that meet the straightedge requirements which will be considered Bump Grinding and will be completed as directed by the Engineer. Ensure all work necessary to address correction areas [as defined in 20SP-501K - Pavement Ride Quality (Mean Roughness Index Acceptance Criteria)] that fall within the limits of ride quality are to be done at no cost to the contract. Ensure all corrections required to bring excluded areas into compliance with the straightedge requirements of subsections 501.03.H or 602.03.I of the Standard Specifications for Construction, are to be done at no cost to the contract. 1.11 mi of Hot mix asphalt cold milling and resurfacing, aggregate shoulders, centerline and shoulder corrugations and pavement markings on M-28 from east of the Hulbert Road to west of Forest Road 3385, Chippewa County. Control Sec Job No Federal No M 17061 208878A N/A Net classification required for this project is 522 Cb In addition to the above minimum prequalification requirement for prime contractors this project includes a subclassification of N9-3A. If the prime contractor is not prequalified in this subclassification it must use a prequalified subcontractor. This subcontractor must be designated prior to award of the contract to the confirmed low bidder. MI DOT - 2209 028 - Hot Mix Asphalt Cold Milling and Resurfacing, Aggregate Shoulders and Pavement Markings on M-28