Site work for a playground / park / athletic field in Cottleville, Missouri. Completed plans call for site work for a playground / park / athletic field.

The City of O'Fallon, Missouri is accepting sealed bids for a fencing project. The City of O'Fallon reserves the right to reject any and all bids and waive any informality. The City of O'Fallon also reserves the right to select the lowest and/or best bidder as determined by the City in its sole discretion. PROJECT DESCRIPTION: General Information City staff will remove all fencing material below 12'. Contractor is responsible for removal of the top 12' of fabric on the backstops. City staff will dispose of all old fencing materials. The City will pour a curb in the fence line approx. 6" in height. This will impact the height of the fence material and will require a lot of additional cutting/modification in the field or special order. It is the responsibility of the contractor to take this into consideration when bidding. Install of all new fence ties, brackets/bolts and tension bars. Fence ties to be double turned on one end and facing out of the playing field to avoid injury of players. All post to remain. BASE BID - Ballfield Diamond F Field F: Install new 6' Overhang 11-gauge fabric. 2" extension post to create the 6' overhang on the backstop. 4" to 2" backstop adapters. o Framed out with 1 5/8" rail including mid-rail throughout the overhang. o Approx. 53 LF in length. Backstop o Replace existing chain link fabric on backstops, approx. 53 LF x 24' in height o Lowest 12' of fabric is to be 6-gauge, highest level of 12' fabric is to be 9 gauge. o Install additional mid rail 1 5/8" Approx. 1 foot above mid rail that joins the 6 and 9 gauge of fabric together throughout entire 53 LF of backstop. Section between corner of 24' backstop and the start of the dugout on first base side. o This section is approx. 38' in length. o It is to be replaced with fabric height of 11'. Section between corner of backstop and the dugout on third base side. o This section is approx. 38' in length. o It is to be replaced with fabric height of 11'. Dugout first base side o Fabric Approx. 28' x 7' 1/2 " of field side of dugout. (Will require custom cutting to be below the framing of the roof). o Fabric Approx. 32' x 7' of back side of dugout. (May require custom cutting). o Fabric Approx. 9' x 8' on side of dugout (Will require custom cutting to meet the angle of the roof with one piece). Dugout third base side o Fabric Approx. 28' x 7' 1/2 " of field side of dugout. (Will require custom cutting to be below the framing of the roof) o Fabric Approx. 32' x 7' of back side of dugout. (May require custom cutting). o Fabric Approx. 7' x 8' on side of dugout (Will require custom cutting to meet the angle of the roof with one piece). Sideline Fabric o First base side First section Approx. 40' X 7' 1/2 " - Total of 8' with 6" curb. Second section Approx. 162' X 6' Add bottom rail 1 5/8" Approx. 162 LF of bottom rail. Use existing double gate framing - Approx. 20' opening. All new fabric on gate to include latch and center locking post. o Third base side First section Approx. 40' X 7' 1/2 " - Total of 8' with 6" curb. Second section Approx. 162' X 72" Add bottom rail 1 5/8" Approx. 162 LF of bottom rail. New locking hardware and center post. Straighten existing hinges and replace 20' of fabric on gates. Fabric (All New) o Backstop fabric to be 2" x 6-gauge x 12' tall, galvanized chain link fabric for the first 12 feet of height and 2" x 9-gauge x 12' for the second 12 feet. o Fabric to be 2" - 9-gauge x 12' tall, galvanized chain link fabric at wings between backstop and dugouts. o Dugout fabric to be 2" - 9-gauge galvanized chain link fabric. o Fabric to be 2" - 11-gauge x 6' tall, galvanized chain link fabric at overhang section of backstop