Renovation of an educational facility in Mobile, Alabama. Completed plans call for the renovation of a educational facility.

Plans and specifications are for viewing purposes only and in order to be considered an official bidder contractors must obtain plans and specifications from Goodwyn Mills & Cawood Inc. PLEASE NOTE: The estimated value listed for this project is for searchability purposes only and does not reflect the actual construction budget as determined by the owner. It should not be used for estimation purposes at this time. For Bishop State Community College Mobile, Alabama If you are mailing your bid, please allow enough time so that the bid is received prior to November 03, 2022. Mailed bids should be addressed to the Purchasing Agent / Business Office at 351 North Broad Street, Mobile, Alabama, 36603. The Work of the project includes, but is not limited to: Selective Interior Demolition, improvements and all related work at Southwest Building 100 as indicated on the drawings; connections to existing improvements, temporary protections, and all related work. Project completion time for the contract is sixty (60) calendar days. A cashier's check or bid bond payable to BISHOP STATE COMMUNITY COLLEGE in an amount not less than five (5) percent of the amount of the bid, but in no event more than $10,000, must accompany the bidder's proposal. Performance and statutory Labor and Material Payment Bonds, insurance in compliance with requirements, and verification of E-Verify enrollment will be required at the signing of the Contract. Contractors are encouraged to use the digital plans. Refunds will be issued for printed sets only issued by the Architect to each general contract bidder on the first two (2) sets issued submitting a bonafide bid, upon return of documents in good and reusable condition within ten (10) days of bid date. Additional sets for General Contractors, and sets for subs and vendors, may be obtained with the same deposit, which will be refunded as above, less cost of printing, reproduction, handling and distribution, which is estimated to be the same as the deposit amount. Checks shall be made payable to "Goodwyn Mills Cawood, LLC" Bid documents will be mailed only upon receipt of deposit. No bid documents will be distributed later than 24 hours prior to the scheduled opening of bids. Partial sets of Bidding Documents will not be available from the Issuing Office. Neither Owner nor Architect will be responsible for full or partial sets of Bidding Documents, including Addenda if any, obtained from sources other than the Issuing Office. For the list of plan holders on this project visit online. All bidders bidding in amounts exceeding that established by the State Licensing Board for General Contractors must be licensed under the Provision of Title 34, Chapter 8, Code of Alabama, 1975, as amended, and must show such evidence of license before bidding or bid will not be received or considered by Construction Manager, Architect or Owner. The bidder shall show such evidence by clearly displaying his or her current license number on the outside of the sealed envelope in which the proposal is delivered; Bidder must also include his or her current license number on the Proposal Form. Subcontractors and material suppliers that are excluded from doing business with the Federal government may not participate in this project. It is the bidding contractor's responsibility determine who is excluded from doing business with the Federal Government. No bid may be withdrawn after the scheduled closing time for receipt of bids for a period of sixty (60) days. This project is being bid, under the provisions of Alabama Act 2000-684, which require the General Contractor, in part, to take advantage of the Owner's tax-exempt status, obtain necessary certificates and other documentation required from the Alabama Department of Revenue, make payment for all materials, and to administer the sales and use tax savings portion of the project, as a part of their Bid. Additional qualifications and requirements for General Contractor Bidders and separate Subcontractors are indicated in the Bid and Contract Documents. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in their judgment, the best interests of the Owner will thereby be promoted.