Renovation of a municipal facility in Sterling, Massachusetts. Completed plans call for the renovation of a municipal facility.

Contractors for the Butterick Municipal Building Roof Replacement The Project consists of: The removal of the existing EPDM roof system and all associated components down to structural deck and installation of a new PVC roof system and all associated components, including but not limited to roof membrane, coverboard, insulation, vapor retarder, fascia metal, copings, and through wall flashings. Bids are subject to M.G.L. c.149 44A-J & to minimum wage rates as required by M.G.L. c.l49 26 to 27H inclusive. General bids and sub-bids shall be accompanied by a bid deposit that is not less than five (5%) of the greatest possible bid amount (considering all alternates) and made payable to the Town of Sterling. Labor & Materials Payment Bond and Contract Price Performance Bond shall be included with the bid and shall be for one hundred percent (100%) of Contract price. 1. Remove the existing EPDM roof system and all associated components down to the structural decking. 2. Remove the existing abandoned HVAC equipment, where indicated on the Drawings. 3. Install new PVC roof system and all associated components, including but not limited to, roof membrane, coverboard, insulation, vapor retarder, and edge metal. 4. Remove and replace brick masonry, where indicated on the Drawings. 5. Install through-wall flashings, where indicated on the Drawings. 6. Remove and replace roof drains; connect to existing leader lines; insulate leader lines as required; modify and repair gypsum wallboard ceiling finishes as required.